On Sat, Dec 19, 2015 at 01:08:26PM +0100, Stefan Sperling wrote:
> On Fri, Dec 18, 2015 at 05:40:39PM -0500, David Hill wrote:
> > With sthen@'s patch I can associate, dhcp, and use net.
>
> Here's an updated iwn diff with a better approach for Stuart's fix.
>
> Thanks for helping, Stuart, and to everyone who sent beacons which
> allowed us to narrow this problem down to protection settings being
> set up the wrong way in iwn_run().
Thanks, works well on my T420!
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34: msi,
MIMO 2T2R, MoW, address a0:88:b4:48:4d:a4
iwn0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
lladdr a0:88:b4:48:4d:a4
priority: 4
groups: wlan egress
media: IEEE802.11 autoselect (HT-MCS7 mode 11n)
status: active
ieee80211: nwid ElectricKingdom chan 6 bssid ac:22:0b:32:d5:48
-19dBm wpakey <not displayed> wpaprotos wpa1,wpa2 wpaakms psk wpaciphers
tkip,ccmp wpagroupcipher tkip
inet6 fe80::a288:b4ff:fe48:4da4%iwn0 prefixlen 64 scopeid 0x2
inet 10.0.0.3 netmask 0xffffff00 broadcast 10.0.0.255
