Forwarding to tech.
On Saturday, 3 September 2016 08:36:43 UTC-5, aaron.ri...@gmail.com wrote: > > On Saturday, 3 September 2016 07:15:27 UTC-5, Martin Pieuchot wrote: > > Yes something changed. That might be the cause for your regression. > > Sadly your bug report does not contain enough information for us to > > figure out. What is your whole config: dmesg, routing table, hostname* > > More info below. > > > Do you run dhclient on your bridge or any of its interface? > > Yes. I run dhclient on em0, which is attached to a modem/router device > provided by my ISP. That modem/router device is a DHCP server that hands > out IPs in the 192.168.0.0/24 subnet. em0 on my box gets 192.168.0.100 > from the DHCP server. em1 on my box has no IP address and is attached to > my internal network of devices. The symptom I am seeing is devices on the > internal network are nearly always unable to obtain a DHCP lease from the > model/router devices when the openbsd bridge is between them. Occasionally > it works, but it is very unreliable. > > This same configuration worked perfectly on 5.9. > > Also note the box has a 3rd interface (re0) but it unused and > unconfigured. > > > And please next time send bug reports to bugs@ :) > > Will do. > > More information: > > $ hostname > server.domain > > $ cat /etc/hostname.em0 > dhcp > > $ cat /etc/hostname.em1 > up > > $ cat /etc/hostname.bridge0 > add em0 > add em1 > up > > $ dmesg > OpenBSD 6.0 (GENERIC.MP) #1: Sat Sep 3 06:59:42 CDT 2016 > root@server.domain:/usr/src/sys/arch/amd64/compile/GENERIC.MP > RTC BIOS diagnostic error 80<clock_battery> > real mem = 1045643264 (997MB) > avail mem = 1009541120 (962MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe35a0 (23 entries) > bios0: vendor Intel Corp. version "LF94510J.86A.0278.2010.0414.2000" date > 04/14/2010 > bios0: Intel Corporation D945GCLF2 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S1 S3 S4 S5 > acpi0: tables DSDT FACP APIC WDDT MCFG ASF! > acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) UAR2(S4) PEX0(S4) > PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) > UHC4(S3) EHCI(S3) AC9M(S4) [...] > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Atom(TM) CPU 330 @ 1.60GHz, 1596.22 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR > > > cpu0: 512KB 64b/line 16-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 133MHz > cpu0: mwait min=64, max=64, C-substates=0.1, IBE > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Atom(TM) CPU 330 @ 1.60GHz, 1596.01 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF,SENSOR > > > cpu1: 512KB 64b/line 16-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf0000000, bus 0-127 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus 4 (P32_) > acpiprt2 at acpi0: bus 1 (PEX0) > acpiprt3 at acpi0: bus -1 (PEX1) > acpiprt4 at acpi0: bus 2 (PEX2) > acpiprt5 at acpi0: bus 3 (PEX3) > acpiprt6 at acpi0: bus -1 (PEX4) > acpiprt7 at acpi0: bus -1 (PEX5) > acpicpu0 at acpi0: C1(@1 halt!) > acpicpu1 at acpi0: C1(@1 halt!) > acpibtn0 at acpi0: SLPB > "PNP0003" at acpi0 not configured > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel 82945G Host" rev 0x02 > inteldrm0 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02 > drm0 at inteldrm0 > intagp0 at inteldrm0 > agp0 at intagp0: aperture at 0x40000000, size 0x10000000 > inteldrm0: apic 2 int 16 > inteldrm0: 1920x1080 > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi > pci1 at ppb0 bus 1 > 1:0:0: mem address conflict 0xfffe0000/0x20000 > re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x02: RTL8168C/8111C > (0x3c00), msi, address 00:1c:c0:f0:cf:9c > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 2 > ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi > pci2 at ppb1 bus 2 > ppb2 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi > pci3 at ppb2 bus 3 > uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int > 23 > uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int > 19 > uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int > 18 > uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int > 16 > ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int > 23 > usb0 at ehci0: USB revision 2.0 > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 > ppb3 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xe1 > pci4 at ppb3 bus 4 > em0 at pci4 dev 0 function 0 "Intel 82546EB" rev 0x01: apic 2 int 21, > address 00:07:e9:19:e0:02 > em1 at pci4 dev 0 function 1 "Intel 82546EB" rev 0x01: apic 2 int 22, > address 00:07:e9:19:e0:03 > pcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01 > pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA, > channel 0 configured to compatibility, channel 1 configured to > compatibility > pciide0: channel 0 disabled (no drives) > pciide0: channel 1 ignored (disabled) > pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA, > channel 0 configured to native-PCI, channel 1 configured to native-PCI > pciide1: using apic 2 int 19 for native-PCI interrupt > wd0 at pciide1 channel 0 drive 0: <SAMSUNG SP2504C> > wd0: 16-sector PIO, LBA48, 238475MB, 488397168 sectors > wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6 > ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 > int 19 > iic0 at ichiic0 > admtm0 at iic0 addr 0x2d: 47m192 > spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-4200CL5 > usb1 at uhci0: USB revision 1.0 > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb2 at uhci1: USB revision 1.0 > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb3 at uhci2: USB revision 1.0 > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > usb4 at uhci3: USB revision 1.0 > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1 > isa0 at pcib0 > isadma0 at isa0 > pckbc0 at isa0 port 0x60/5 irq 1 irq 12 > pckbd0 at pckbc0 (kbd slot) > wskbd0 at pckbd0: console keyboard, using wsdisplay0 > pcppi0 at isa0 port 0x61 > spkr0 at pcppi0 > vscsi0 at root > scsibus1 at vscsi0: 256 targets > softraid0 at root > scsibus2 at softraid0: 256 targets > root on wd0a (c24ccd52000f4972.a) swap on wd0b dump on wd0b > > $ netstat -rn > Routing tables > > Internet: > Destination Gateway Flags Refs Use Mtu Prio > Iface > default 192.168.0.1 UGS 3 53838 - 8 > em0 > 224/4 127.0.0.1 URS 0 0 32768 8 > lo0 > 127/8 127.0.0.1 UGRS 0 0 32768 8 > lo0 > 127.0.0.1 127.0.0.1 UHl 2 14 32768 1 > lo0 > 192.168.0/24 192.168.0.100 UC 1 658 - 4 > em0 > 192.168.0.1 5a:ea:1d:96:c6:a8 UHLc 1 362 - 4 > em0 > 192.168.0.100 00:07:e9:19:e0:02 UHLl 0 324 - 1 > em0 > 192.168.0.255 192.168.0.100 UHb 0 0 - 1 > em0 > > Internet6: > Destination Gateway Flags > Refs Use Mtu Prio Iface > ::/96 ::1 UGRS > 0 0 32768 8 lo0 > ::/104 ::1 UGRS > 0 0 32768 8 lo0 > ::1 ::1 UHl > 14 14 32768 1 lo0 > ::127.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::224.0.0.0/100 ::1 UGRS > 0 0 32768 8 lo0 > ::255.0.0.0/104 ::1 UGRS > 0 0 32768 8 lo0 > ::ffff:0.0.0.0/96 ::1 UGRS > 0 0 32768 8 lo0 > 2002::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:7f00::/24 ::1 UGRS > 0 0 32768 8 lo0 > 2002:e000::/20 ::1 UGRS > 0 0 32768 8 lo0 > 2002:ff00::/24 ::1 UGRS > 0 0 32768 8 lo0 > fe80::/10 ::1 UGRS > 0 0 32768 8 lo0 > fec0::/10 ::1 UGRS > 0 0 32768 8 lo0 > fe80::1%lo0 fe80::1%lo0 UHl > 0 0 32768 1 lo0 > ff01::/16 ::1 UGRS > 0 0 32768 8 lo0 > ff01::%lo0/32 ::1 Um > 0 1 32768 4 lo0 > ff02::/16 ::1 UGRS > 0 0 32768 8 lo0 > ff02::%lo0/32 ::1 Um > 0 1 32768 4 lo0 >