Theo et al.,

I understand that it's an installer, but I do have an interest in
having an OpenBSD installing along side a GNU Linux installation.
That said, the basic "OpenBSD takes over the machine" install does
in fact work just fine.  If that's the only intended use case why
provide instructions for enabling multiboot through GRUB? I've been
attempting multiboot through GRUB 2 but the issues I'm encountering
seem fairly common, and I haven't gotten into the fine details yet.
I'd say that I simply don't see why the installer destructively
re-arranges the disk's scheme prior to officially choosing to write
the new partitioning scheme to the disk.  Howver, I must admit that
the procedure would not work if this were deferred to the next step
in DISKLABEL.

Regarding AMD64 (yes, it's an AMD system, and I'm writing this from
a fresh Ubuntu install for convenience).  I've only managed to get
the system to work from an MBR arrangement thus far. I have included
a DMESG from the fresh Ubuntu install as an email attachment.

On Thu, Jun 25, 2020 at 3:56 PM Theo de Raadt <dera...@openbsd.org> wrote:

> David Blevins <blevi...@ieee.org> wrote:
>
> > OpenBSD Community,
> >
> > I've been experimenting with the OpenBSD 6.7 install process (though
> > this "issue" is likely present in earlier version) and have noticed
> > that the fdisk program in the installation program will destructively
> > edit the hard drive upon selecting either MBR or GPT partitioning.
>
> Yes, because it is an installer of OpenBSD.
>
> The default usage pattern is "OpenBSD takes over the machine".  OpenBSD
> runs on may kinds of platforms, and the dominant pattern is "take over
> the machine".
>
> Perhaps you are thinking of putting multiple operating systems on the
> same disk?
>
> We put minimal effort into sharing a machine between multiple operating
> systems, because it would SUBSTANTIALLY complicate the install
> procedure.
>
> And want to know the other reason we don't have built-in support for
> multiple OS on the disk?  None of us (developers) put multiple operating
> systems onto a single machine.  We tend to develop code we use.
> Meaning, we tend to not develop code we won't use ourselves, because if
> we don't use it ourselves all the time then we won't continually test it
> and take care of it in the future and you can bet it is the first thing
> that breaks, badly.
>
> > I have repeatedly wiped a test hard drive's partitioning scheme as a
> > consequence of this, in spite of only desiring to examine the
> > partitioning scheme.
>
> Oh come on.  You ran the installer.  You are about 10 questions in
> at this point, and you know you are in the installer, and you are
> the first person I've heard in a decade to complain that it should
> not be destructive.
>
> > Is anyone receptive to a less-commital partitioning process for
> > installation?  It seems to me that the drive's partitioning scheme
> > should not be re-written until the user has affirmed that the
> > particular scheme and layout is what they want.
>
> BTW, wait until you try to adapt that to other architectures...
> our code, as written now, makes those easy, but what you propose
> makes the code very difficult.
>
[    0.000000] Linux version 5.3.0-61-generic (buildd@lcy01-amd64-014) (gcc 
version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #55~18.04.1-Ubuntu SMP Mon Jun 22 
16:40:20 UTC 2020 (Ubuntu 5.3.0-61.55~18.04.1-generic 5.3.18)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-61-generic 
root=UUID=b6ae5d12-6509-4ba8-9a1c-74440f2fa573 ro quiet splash vt.handoff=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000]   zhaoxin   Shanghai  
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x207/0x2c0 with 
crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point 
registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, 
using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000aa9bffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aa9c0000-0x00000000aab43fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aab44000-0x00000000aab53fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000aab54000-0x00000000ab957fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ab958000-0x00000000aca34fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000aca35000-0x00000000aca35fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000aca36000-0x00000000acc3bfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000acc3c000-0x00000000ad082fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ad083000-0x00000000ad7f3fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ad7f4000-0x00000000ad7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000084effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x6e2e7018-0x6e2f7057] usable ==> usable
[    0.000000] e820: update [mem 0x6e2e7018-0x6e2f7057] usable ==> usable
[    0.000000] e820: update [mem 0x6e2da018-0x6e2e6857] usable ==> usable
[    0.000000] e820: update [mem 0x6e2da018-0x6e2e6857] usable ==> usable
[    0.000000] e820: update [mem 0x6e2c9018-0x6e2d9057] usable ==> usable
[    0.000000] e820: update [mem 0x6e2c9018-0x6e2d9057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] 
usable
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x000000006e2c9017] 
usable
[    0.000000] reserve setup_data: [mem 0x000000006e2c9018-0x000000006e2d9057] 
usable
[    0.000000] reserve setup_data: [mem 0x000000006e2d9058-0x000000006e2da017] 
usable
[    0.000000] reserve setup_data: [mem 0x000000006e2da018-0x000000006e2e6857] 
usable
[    0.000000] reserve setup_data: [mem 0x000000006e2e6858-0x000000006e2e7017] 
usable
[    0.000000] reserve setup_data: [mem 0x000000006e2e7018-0x000000006e2f7057] 
usable
[    0.000000] reserve setup_data: [mem 0x000000006e2f7058-0x00000000aa9bffff] 
usable
[    0.000000] reserve setup_data: [mem 0x00000000aa9c0000-0x00000000aab43fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000aab44000-0x00000000aab53fff] 
ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000aab54000-0x00000000ab957fff] 
ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000ab958000-0x00000000aca34fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000aca35000-0x00000000aca35fff] 
usable
[    0.000000] reserve setup_data: [mem 0x00000000aca36000-0x00000000acc3bfff] 
ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000acc3c000-0x00000000ad082fff] 
usable
[    0.000000] reserve setup_data: [mem 0x00000000ad083000-0x00000000ad7f3fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000ad7f4000-0x00000000ad7fffff] 
usable
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec20000-0x00000000fec20fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed61000-0x00000000fed70fff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] 
reserved
[    0.000000] reserve setup_data: [mem 0x00000000fef00000-0x00000000ffffffff] 
reserved
[    0.000000] reserve setup_data: [mem 0x0000000100001000-0x000000084effffff] 
usable
[    0.000000] efi: EFI v2.10 by American Megatrends
[    0.000000] efi:  ACPI=0xaab4c000  ACPI 2.0=0xaab4c000  SMBIOS=0xf04c0 
[    0.000000] secureboot: Secure boot enabled
[    0.000000] Kernel is locked down from EFI secure boot; see man 
kernel_lockdown.7
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: To be filled by O.E.M. To be filled by O.E.M./M5A97 LE 
R2.0, BIOS 2701 03/24/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 4013.474 MHz processor
[    0.002990] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.002992] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.010988] AGP: No AGP bridge found
[    0.011059] last_pfn = 0x84f000 max_arch_pfn = 0x400000000
[    0.011063] MTRR default type: uncachable
[    0.011064] MTRR fixed ranges enabled:
[    0.011065]   00000-9FFFF write-back
[    0.011066]   A0000-BFFFF write-through
[    0.011066]   C0000-CFFFF write-protect
[    0.011067]   D0000-DFFFF uncachable
[    0.011068]   E0000-FFFFF write-protect
[    0.011068] MTRR variable ranges enabled:
[    0.011069]   0 base 000000000000 mask FFFF80000000 write-back
[    0.011071]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.011072]   2 base 0000AD800000 mask FFFFFF800000 uncachable
[    0.011073]   3 base 0000AE000000 mask FFFFFE000000 uncachable
[    0.011073]   4 base 0000B0000000 mask FFFFF0000000 uncachable
[    0.011074]   5 disabled
[    0.011074]   6 disabled
[    0.011075]   7 disabled
[    0.011076] TOM2: 000000084f000000 aka 34032M
[    0.011892] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.011972] total RAM covered: 2776M
[    0.012507] Found optimal setting for mtrr clean up
[    0.012508]  gran_size: 64K  chunk_size: 64M         num_reg: 5      lose 
cover RAM: 0G
[    0.013109] e820: update [mem 0xad800000-0xffffffff] usable ==> reserved
[    0.013115] last_pfn = 0xad800 max_arch_pfn = 0x400000000
[    0.017182] check: Scanning 1 areas for low memory corruption
[    0.017188] Using GB pages for direct mapping
[    0.017190] BRK [0x54ce01000, 0x54ce01fff] PGTABLE
[    0.017192] BRK [0x54ce02000, 0x54ce02fff] PGTABLE
[    0.017193] BRK [0x54ce03000, 0x54ce03fff] PGTABLE
[    0.017213] BRK [0x54ce04000, 0x54ce04fff] PGTABLE
[    0.017214] BRK [0x54ce05000, 0x54ce05fff] PGTABLE
[    0.017215] BRK [0x54ce06000, 0x54ce06fff] PGTABLE
[    0.017549] BRK [0x54ce07000, 0x54ce07fff] PGTABLE
[    0.017579] BRK [0x54ce08000, 0x54ce08fff] PGTABLE
[    0.017614] BRK [0x54ce09000, 0x54ce09fff] PGTABLE
[    0.017682] BRK [0x54ce0a000, 0x54ce0afff] PGTABLE
[    0.017722] BRK [0x54ce0b000, 0x54ce0bfff] PGTABLE
[    0.017784] BRK [0x54ce0c000, 0x54ce0cfff] PGTABLE
[    0.017931] RAMDISK: [mem 0x3acfd000-0x3d493fff]
[    0.017940] ACPI: Early table checksum verification disabled
[    0.017943] ACPI: RSDP 0x00000000AAB4C000 000024 (v02 ALASKA)
[    0.017946] ACPI: XSDT 0x00000000AAB4C070 00005C (v01 ALASKA A M I    
01072009 AMI  00010013)
[    0.017952] ACPI: FACP 0x00000000AAB52EB8 00010C (v05 ALASKA A M I    
01072009 AMI  00010013)
[    0.017956] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has 
valid Length but zero Address: 0x0000000000000000/0x1 (20190703/tbfadt-624)
[    0.017960] ACPI: DSDT 0x00000000AAB4C168 006D50 (v02 ALASKA A M I    
00000000 INTL 20051117)
[    0.017963] ACPI: FACS 0x00000000AB952F80 000040
[    0.017965] ACPI: APIC 0x00000000AAB52FC8 00009E (v03 ALASKA A M I    
01072009 AMI  00010013)
[    0.017968] ACPI: FPDT 0x00000000AAB53068 000044 (v01 ALASKA A M I    
01072009 AMI  00010013)
[    0.017971] ACPI: MCFG 0x00000000AAB530B0 00003C (v01 ALASKA A M I    
01072009 MSFT 00010013)
[    0.017974] ACPI: HPET 0x00000000AAB530F0 000038 (v01 ALASKA A M I    
01072009 AMI  00000005)
[    0.017976] ACPI: SSDT 0x00000000AAB531B8 000304 (v01 AMD    POWERNOW 
00000001 AMD  00000001)
[    0.017979] ACPI: BGRT 0x00000000AAB53180 000038 (v00 ALASKA A M I    
01072009 AMI  00010013)
[    0.017987] ACPI: Local APIC address 0xfee00000
[    0.018107] No NUMA configuration found
[    0.018108] Faking a node at [mem 0x0000000000000000-0x000000084effffff]
[    0.018118] NODE_DATA(0) allocated [mem 0x84efd3000-0x84effdfff]
[    0.018388] Zone ranges:
[    0.018388]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.018389]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.018390]   Normal   [mem 0x0000000100000000-0x000000084effffff]
[    0.018391]   Device   empty
[    0.018392] Movable zone start for each node
[    0.018394] Early memory node ranges
[    0.018395]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.018396]   node   0: [mem 0x0000000000100000-0x00000000aa9bffff]
[    0.018397]   node   0: [mem 0x00000000aca35000-0x00000000aca35fff]
[    0.018397]   node   0: [mem 0x00000000acc3c000-0x00000000ad082fff]
[    0.018398]   node   0: [mem 0x00000000ad7f4000-0x00000000ad7fffff]
[    0.018398]   node   0: [mem 0x0000000100001000-0x000000084effffff]
[    0.018642] Zeroed struct page in unavailable ranges: 25166 pages
[    0.018643] Initmem setup node 0 [mem 0x0000000000001000-0x000000084effffff]
[    0.018644] On node 0 totalpages: 8363442
[    0.018645]   DMA zone: 64 pages used for memmap
[    0.018646]   DMA zone: 24 pages reserved
[    0.018647]   DMA zone: 3999 pages, LIFO batch:0
[    0.018697]   DMA32 zone: 10873 pages used for memmap
[    0.018698]   DMA32 zone: 695828 pages, LIFO batch:63
[    0.029365]   Normal zone: 119744 pages used for memmap
[    0.029368]   Normal zone: 7663615 pages, LIFO batch:63
[    0.129383] ACPI: PM-Timer IO Port: 0x808
[    0.129387] ACPI: Local APIC address 0xfee00000
[    0.129395] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.129403] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.129405] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.129407] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.129409] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.129410] ACPI: IRQ0 used by override.
[    0.129411] ACPI: IRQ9 used by override.
[    0.129413] Using ACPI (MADT) for SMP configuration information
[    0.129414] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.129419] efi_bgrt: Ignoring BGRT: invalid image address
[    0.129422] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.129448] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.129450] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.129452] PM: Registered nosave memory: [mem 0x6e2c9000-0x6e2c9fff]
[    0.129454] PM: Registered nosave memory: [mem 0x6e2d9000-0x6e2d9fff]
[    0.129454] PM: Registered nosave memory: [mem 0x6e2da000-0x6e2dafff]
[    0.129456] PM: Registered nosave memory: [mem 0x6e2e6000-0x6e2e6fff]
[    0.129457] PM: Registered nosave memory: [mem 0x6e2e7000-0x6e2e7fff]
[    0.129459] PM: Registered nosave memory: [mem 0x6e2f7000-0x6e2f7fff]
[    0.129461] PM: Registered nosave memory: [mem 0xaa9c0000-0xaab43fff]
[    0.129461] PM: Registered nosave memory: [mem 0xaab44000-0xaab53fff]
[    0.129462] PM: Registered nosave memory: [mem 0xaab54000-0xab957fff]
[    0.129462] PM: Registered nosave memory: [mem 0xab958000-0xaca34fff]
[    0.129464] PM: Registered nosave memory: [mem 0xaca36000-0xacc3bfff]
[    0.129466] PM: Registered nosave memory: [mem 0xad083000-0xad7f3fff]
[    0.129468] PM: Registered nosave memory: [mem 0xad800000-0xfebfffff]
[    0.129468] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.129469] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[    0.129469] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.129470] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[    0.129470] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[    0.129471] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[    0.129471] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.129472] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[    0.129472] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[    0.129473] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[    0.129473] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.129474] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[    0.129474] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[    0.129475] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[    0.129476] [mem 0xad800000-0xfebfffff] available for PCI devices
[    0.129478] Booting paravirtualized kernel on bare hardware
[    0.129481] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.129488] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 
nr_node_ids:1
[    0.129958] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.129967] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.129968] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.130003] Built 1 zonelists, mobility grouping on.  Total pages: 8232737
[    0.130003] Policy zone: Normal
[    0.130005] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-61-generic 
root=UUID=b6ae5d12-6509-4ba8-9a1c-74440f2fa573 ro quiet splash vt.handoff=1
[    0.135392] Dentry cache hash table entries: 4194304 (order: 13, 33554432 
bytes, linear)
[    0.138053] Inode-cache hash table entries: 2097152 (order: 12, 16777216 
bytes, linear)
[    0.138084] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.148690] AGP: Checking aperture...
[    0.156682] AGP: No AGP bridge found
[    0.156686] AGP: Node 0: aperture [bus addr 0x00000000-0x01ffffff] (32MB)
[    0.156687] AGP: Your BIOS doesn't leave an aperture memory hole
[    0.156687] AGP: Please enable the IOMMU option in the BIOS setup
[    0.156688] AGP: This costs you 64MB of RAM
[    0.156691] AGP: Mapping aperture over RAM [mem 0x90000000-0x93ffffff] 
(65536KB)
[    0.156694] PM: Registered nosave memory: [mem 0x90000000-0x93ffffff]
[    0.264946] Memory: 32460740K/33453768K available (14339K kernel code, 2369K 
rwdata, 4672K rodata, 2664K init, 5072K bss, 993028K reserved, 0K cma-reserved)
[    0.265108] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.265121] ftrace: allocating 43324 entries in 170 pages
[    0.283007] rcu: Hierarchical RCU implementation.
[    0.283008] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8.
[    0.283009]  Tasks RCU enabled.
[    0.283010] rcu: RCU calculated value of scheduler-enlistment delay is 25 
jiffies.
[    0.283010] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.286048] NR_IRQS: 524544, nr_irqs: 1032, preallocated irqs: 16
[    0.286383] vt handoff: transparent VT on vt#1
[    0.286389] Console: colour dummy device 80x25
[    0.286395] printk: console [tty0] enabled
[    0.286409] ACPI: Core revision 20190703
[    0.286495] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 133484873504 ns
[    0.286507] APIC: Switch to symmetric I/O mode setup
[    0.286988] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.306508] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 
0x39da1500864, max_idle_ns: 440795315270 ns
[    0.306511] Calibrating delay loop (skipped), value calculated using timer 
frequency.. 8026.94 BogoMIPS (lpj=16053896)
[    0.306513] pid_max: default: 32768 minimum: 301
[    0.314540] LSM: Security Framework initializing
[    0.314551] Yama: becoming mindful.
[    0.314603] AppArmor: AppArmor initialized
[    0.314723] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, 
linear)
[    0.314812] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 
bytes, linear)
[    0.314966] *** VALIDATE proc ***
[    0.315017] *** VALIDATE cgroup1 ***
[    0.315018] *** VALIDATE cgroup2 ***
[    0.315059] LVT offset 1 assigned for vector 0xf9
[    0.315063] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.315064] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.315066] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user 
pointer sanitization
[    0.315068] Spectre V2 : Mitigation: Full AMD retpoline
[    0.315068] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on 
context switch
[    0.315070] Spectre V2 : mitigation: Enabling conditional Indirect Branch 
Prediction Barrier
[    0.315070] Spectre V2 : User space: Vulnerable
[    0.315071] Speculative Store Bypass: Mitigation: Speculative Store Bypass 
disabled via prctl and seccomp
[    0.315235] Freeing SMP alternatives memory: 40K
[    0.428463] smpboot: CPU0: AMD FX(tm)-8350 Eight-Core Processor (family: 
0x15, model: 0x2, stepping: 0x0)
[    0.428574] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.428578] ... version:                0
[    0.428578] ... bit width:              48
[    0.428578] ... generic registers:      6
[    0.428579] ... value mask:             0000ffffffffffff
[    0.428579] ... max period:             00007fffffffffff
[    0.428580] ... fixed-purpose events:   0
[    0.428580] ... event mask:             000000000000003f
[    0.428616] rcu: Hierarchical SRCU implementation.
[    0.429240] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.429341] smp: Bringing up secondary CPUs ...
[    0.429456] x86: Booting SMP configuration:
[    0.429457] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.462566] smp: Brought up 1 node, 8 CPUs
[    0.462566] smpboot: Max logical packages: 1
[    0.462566] smpboot: Total of 8 processors activated (64215.58 BogoMIPS)
[    0.467577] devtmpfs: initialized
[    0.467577] x86/mm: Memory block size: 128MB
[    0.474107] PM: Registering ACPI NVS region [mem 0xaab54000-0xab957fff] 
(14696448 bytes)
[    0.474107] PM: Registering ACPI NVS region [mem 0xaca36000-0xacc3bfff] 
(2121728 bytes)
[    0.474107] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, 
max_idle_ns: 7645041785100000 ns
[    0.474107] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.474514] pinctrl core: initialized pinctrl subsystem
[    0.474514] PM: RTC time: 19:53:57, date: 2020-06-25
[    0.474514] NET: Registered protocol family 16
[    0.474514] audit: initializing netlink subsys (disabled)
[    0.474532] audit: type=2000 audit(1593114837.188:1): state=initialized 
audit_enabled=0 res=1
[    0.474672] EISA bus registered
[    0.474685] cpuidle: using governor ladder
[    0.474685] cpuidle: using governor menu
[    0.474685] ACPI: bus type PCI registered
[    0.474685] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.474685] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.474685] PCI: not using MMCONFIG
[    0.474685] PCI: Using configuration type 1 for base access
[    0.474685] PCI: Using configuration type 1 for extended access
[    0.478761] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.478761] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.482606] ACPI: Added _OSI(Module Device)
[    0.482607] ACPI: Added _OSI(Processor Device)
[    0.482608] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.482608] ACPI: Added _OSI(Processor Aggregator Device)
[    0.482609] ACPI: Added _OSI(Linux-Dell-Video)
[    0.482610] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.482611] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.486514] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.486514] ACPI: EC: EC started
[    0.486514] ACPI: EC: interrupt blocked
[    0.486514] ACPI: \_SB_.PCI0.SBRG.EC0_: Used as first EC
[    0.486514] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, 
EC_DATA=0x62
[    0.486514] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle 
transactions
[    0.486514] ACPI: Interpreter enabled
[    0.486514] ACPI: (supports S0 S3 S4 S5)
[    0.486514] ACPI: Using IOAPIC for interrupt routing
[    0.486514] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.486514] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI 
motherboard resources
[    0.486514] PCI: Using host bridge windows from ACPI; if necessary, use 
"pci=nocrs" and report a bug
[    0.486514] ACPI: Enabled 10 GPEs in block 00 to 1F
[    0.495248] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.495254] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM 
Segments MSI HPX-Type3]
[    0.495664] PCI host bridge to bus 0000:00
[    0.495666] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.495667] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.495668] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.495669] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.495670] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff 
window]
[    0.495671] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff 
window]
[    0.495672] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff 
window]
[    0.495673] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.495685] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    0.495811] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    0.495828] pci 0000:00:02.0: enabling Extended Tags
[    0.495850] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    0.495943] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    0.495961] pci 0000:00:04.0: enabling Extended Tags
[    0.495981] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    0.496069] pci 0000:00:07.0: [1002:5a1b] type 01 class 0x060400
[    0.496086] pci 0000:00:07.0: enabling Extended Tags
[    0.496106] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    0.496193] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    0.496209] pci 0000:00:09.0: enabling Extended Tags
[    0.496230] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    0.496323] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    0.496339] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    0.496346] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    0.496353] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    0.496359] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    0.496366] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    0.496373] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    0.496481] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    0.496494] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    0.496622] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    0.496637] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    0.496695] pci 0000:00:12.2: supports D1 D2
[    0.496696] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    0.496788] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    0.496801] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    0.496923] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    0.496939] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    0.496997] pci 0000:00:13.2: supports D1 D2
[    0.496998] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    0.497086] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    0.497217] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    0.497235] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    0.497283] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.497379] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    0.497511] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    0.497621] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    0.497634] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    0.497759] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    0.497791] pci 0000:00:15.0: enabling Extended Tags
[    0.497825] pci 0000:00:15.0: supports D1 D2
[    0.497920] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    0.497933] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    0.498054] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    0.498070] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    0.498127] pci 0000:00:16.2: supports D1 D2
[    0.498128] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    0.498217] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    0.498297] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    0.498374] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    0.498453] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    0.498536] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    0.498614] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    0.498731] pci 0000:01:00.0: [1002:6798] type 00 class 0x030000
[    0.498749] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit 
pref]
[    0.498756] pci 0000:01:00.0: reg 0x18: [mem 0xfea00000-0xfea3ffff 64bit]
[    0.498761] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.498770] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[    0.498774] pci 0000:01:00.0: enabling Extended Tags
[    0.498783] pci 0000:01:00.0: BAR 0: assigned to efifb
[    0.498819] pci 0000:01:00.0: supports D1 D2
[    0.498820] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.498846] pci 0000:01:00.0: 64.000 Gb/s available PCIe bandwidth, limited 
by 5 GT/s x16 link at 0000:00:02.0 (capable of 126.016 Gb/s with 8 GT/s x16 
link)
[    0.498883] pci 0000:01:00.1: [1002:aaa0] type 00 class 0x040300
[    0.498896] pci 0000:01:00.1: reg 0x10: [mem 0xfea60000-0xfea63fff 64bit]
[    0.498915] pci 0000:01:00.1: enabling Extended Tags
[    0.498947] pci 0000:01:00.1: supports D1 D2
[    0.499007] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.499010] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.499012] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.499014] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 
64bit pref]
[    0.499047] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.499067] pci 0000:02:00.0: reg 0x10: [io  0xd000-0xd0ff]
[    0.499085] pci 0000:02:00.0: reg 0x18: [mem 0xd0004000-0xd0004fff 64bit 
pref]
[    0.499096] pci 0000:02:00.0: reg 0x20: [mem 0xd0000000-0xd0003fff 64bit 
pref]
[    0.499162] pci 0000:02:00.0: supports D1 D2
[    0.499163] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.499242] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.499245] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.499248] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 
64bit pref]
[    0.499283] pci 0000:03:00.0: [1b21:1142] type 00 class 0x0c0330
[    0.499307] pci 0000:03:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    0.499399] pci 0000:03:00.0: PME# supported from D3cold
[    0.499464] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.499467] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.499509] pci 0000:04:00.0: [8086:0082] type 00 class 0x028000
[    0.499543] pci 0000:04:00.0: reg 0x10: [mem 0xfe800000-0xfe801fff 64bit]
[    0.499662] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.499755] pci 0000:00:09.0: PCI bridge to [bus 04]
[    0.499758] pci 0000:00:09.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.499768] pci_bus 0000:05: extended config space not accessible
[    0.499844] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    0.499850] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] 
(subtractive decode)
[    0.499851] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] 
(subtractive decode)
[    0.499852] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] 
(subtractive decode)
[    0.499853] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] 
(subtractive decode)
[    0.499854] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff 
window] (subtractive decode)
[    0.499855] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff 
window] (subtractive decode)
[    0.499856] pci 0000:00:14.4:   bridge window [mem 0xb0000000-0xffffffff 
window] (subtractive decode)
[    0.499905] pci 0000:06:00.0: [1002:6798] type 00 class 0x030000
[    0.499931] pci 0000:06:00.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit 
pref]
[    0.499940] pci 0000:06:00.0: reg 0x18: [mem 0xfe700000-0xfe73ffff 64bit]
[    0.499946] pci 0000:06:00.0: reg 0x20: [io  0xc000-0xc0ff]
[    0.499956] pci 0000:06:00.0: reg 0x30: [mem 0xfe740000-0xfe75ffff pref]
[    0.499962] pci 0000:06:00.0: enabling Extended Tags
[    0.500029] pci 0000:06:00.0: supports D1 D2
[    0.500030] pci 0000:06:00.0: PME# supported from D1 D2 D3hot
[    0.500065] pci 0000:06:00.0: 16.000 Gb/s available PCIe bandwidth, limited 
by 5 GT/s x4 link at 0000:00:15.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.500108] pci 0000:06:00.1: [1002:aaa0] type 00 class 0x040300
[    0.500129] pci 0000:06:00.1: reg 0x10: [mem 0xfe760000-0xfe763fff 64bit]
[    0.500159] pci 0000:06:00.1: enabling Extended Tags
[    0.500209] pci 0000:06:00.1: supports D1 D2
[    0.500289] pci 0000:00:15.0: PCI bridge to [bus 06]
[    0.500292] pci 0000:00:15.0:   bridge window [io  0xc000-0xcfff]
[    0.500295] pci 0000:00:15.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.500298] pci 0000:00:15.0:   bridge window [mem 0xb0000000-0xbfffffff 
64bit pref]
[    0.500719] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.500800] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.500885] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.500969] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 10 11 14 15) *0
[    0.501060] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.501113] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.501167] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.501220] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.502554] ACPI: EC: interrupt unblocked
[    0.502561] ACPI: EC: event unblocked
[    0.502566] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0xa, EC_CMD/EC_SC=0x66, 
EC_DATA=0x62
[    0.502568] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle 
transactions and events
[    0.502687] SCSI subsystem initialized
[    0.502707] libata version 3.00 loaded.
[    0.502707] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.502707] pci 0000:01:00.0: vgaarb: VGA device added: 
decodes=io+mem,owns=io+mem,locks=none
[    0.502707] pci 0000:06:00.0: vgaarb: VGA device added: 
decodes=io+mem,owns=none,locks=none
[    0.502707] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.502707] pci 0000:06:00.0: vgaarb: bridge control possible
[    0.502707] vgaarb: loaded
[    0.502707] ACPI: bus type USB registered
[    0.502707] usbcore: registered new interface driver usbfs
[    0.502707] usbcore: registered new interface driver hub
[    0.502707] usbcore: registered new device driver usb
[    0.502707] pps_core: LinuxPPS API ver. 1 registered
[    0.502707] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo 
Giometti <giome...@linux.it>
[    0.502707] PTP clock support registered
[    0.502707] EDAC MC: Ver: 3.0.0
[    0.502707] Registered efivars operations
[    0.502707] PCI: Using ACPI for IRQ routing
[    0.507142] PCI: pci_cache_line_size set to 64 bytes
[    0.507194] e820: reserve RAM buffer [mem 0x6e2c9018-0x6fffffff]
[    0.507195] e820: reserve RAM buffer [mem 0x6e2da018-0x6fffffff]
[    0.507195] e820: reserve RAM buffer [mem 0x6e2e7018-0x6fffffff]
[    0.507196] e820: reserve RAM buffer [mem 0xaa9c0000-0xabffffff]
[    0.507197] e820: reserve RAM buffer [mem 0xaca36000-0xafffffff]
[    0.507198] e820: reserve RAM buffer [mem 0xad083000-0xafffffff]
[    0.507198] e820: reserve RAM buffer [mem 0xad800000-0xafffffff]
[    0.507199] e820: reserve RAM buffer [mem 0x84f000000-0x84fffffff]
[    0.507290] NetLabel: Initializing
[    0.507290] NetLabel:  domain hash size = 128
[    0.507291] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.507303] NetLabel:  unlabeled traffic allowed by default
[    0.507320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.507320] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.510516] clocksource: Switched to clocksource tsc-early
[    0.524728] VFS: Disk quotas dquot_6.6.0
[    0.524744] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.524769] *** VALIDATE hugetlbfs ***
[    0.524864] AppArmor: AppArmor Filesystem Enabled
[    0.524885] pnp: PnP ACPI init
[    0.525011] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.525016] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.525337] system 00:01: [io  0x040b] has been reserved
[    0.525338] system 00:01: [io  0x04d6] has been reserved
[    0.525339] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    0.525342] system 00:01: [io  0x0c14] has been reserved
[    0.525343] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    0.525344] system 00:01: [io  0x0c52] has been reserved
[    0.525345] system 00:01: [io  0x0c6c] has been reserved
[    0.525346] system 00:01: [io  0x0c6f] has been reserved
[    0.525348] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    0.525349] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    0.525350] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    0.525351] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    0.525352] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    0.525353] system 00:01: [io  0x0800-0x089f] has been reserved
[    0.525354] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    0.525355] system 00:01: [io  0x0900-0x090f] has been reserved
[    0.525356] system 00:01: [io  0x0910-0x091f] has been reserved
[    0.525358] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    0.525359] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.525361] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.525362] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.525364] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.525365] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.525366] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    0.525368] system 00:01: [mem 0xff800000-0xffffffff] has been reserved
[    0.525371] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.525542] system 00:02: [io  0x0290-0x02af] has been reserved
[    0.525545] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.525570] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.525630] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.525633] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.525676] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.525888] pnp 00:06: [dma 0 disabled]
[    0.525927] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.526064] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.526176] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[    0.526179] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.526343] pnp: PnP ACPI: found 9 devices
[    0.527989] thermal_sys: Registered thermal governor 'fair_share'
[    0.527989] thermal_sys: Registered thermal governor 'bang_bang'
[    0.527990] thermal_sys: Registered thermal governor 'step_wise'
[    0.527991] thermal_sys: Registered thermal governor 'user_space'
[    0.527991] thermal_sys: Registered thermal governor 'power_allocator'
[    0.532486] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, 
max_idle_ns: 2085701024 ns
[    0.532521] pci 0000:00:02.0: PCI bridge to [bus 01]
[    0.532523] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    0.532526] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.532527] pci 0000:00:02.0:   bridge window [mem 0xc0000000-0xcfffffff 
64bit pref]
[    0.532530] pci 0000:00:04.0: PCI bridge to [bus 02]
[    0.532531] pci 0000:00:04.0:   bridge window [io  0xd000-0xdfff]
[    0.532534] pci 0000:00:04.0:   bridge window [mem 0xd0000000-0xd00fffff 
64bit pref]
[    0.532536] pci 0000:00:07.0: PCI bridge to [bus 03]
[    0.532538] pci 0000:00:07.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.532541] pci 0000:00:09.0: PCI bridge to [bus 04]
[    0.532543] pci 0000:00:09.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.532547] pci 0000:00:14.4: PCI bridge to [bus 05]
[    0.532555] pci 0000:00:15.0: PCI bridge to [bus 06]
[    0.532556] pci 0000:00:15.0:   bridge window [io  0xc000-0xcfff]
[    0.532559] pci 0000:00:15.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    0.532561] pci 0000:00:15.0:   bridge window [mem 0xb0000000-0xbfffffff 
64bit pref]
[    0.532566] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.532567] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.532568] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.532569] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.532570] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.532571] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.532572] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff window]
[    0.532573] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.532574] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.532575] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit 
pref]
[    0.532576] pci_bus 0000:02: resource 0 [io  0xd000-0xdfff]
[    0.532577] pci_bus 0000:02: resource 2 [mem 0xd0000000-0xd00fffff 64bit 
pref]
[    0.532578] pci_bus 0000:03: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.532579] pci_bus 0000:04: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.532580] pci_bus 0000:05: resource 4 [io  0x0000-0x03af window]
[    0.532581] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7 window]
[    0.532582] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df window]
[    0.532583] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff window]
[    0.532584] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.532585] pci_bus 0000:05: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.532586] pci_bus 0000:05: resource 10 [mem 0xb0000000-0xffffffff window]
[    0.532587] pci_bus 0000:06: resource 0 [io  0xc000-0xcfff]
[    0.532588] pci_bus 0000:06: resource 1 [mem 0xfe700000-0xfe7fffff]
[    0.532589] pci_bus 0000:06: resource 2 [mem 0xb0000000-0xbfffffff 64bit 
pref]
[    0.532652] NET: Registered protocol family 2
[    0.532880] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 
262144 bytes, linear)
[    0.533197] TCP established hash table entries: 262144 (order: 9, 2097152 
bytes, linear)
[    0.533593] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, 
linear)
[    0.533674] TCP: Hash tables configured (established 262144 bind 65536)
[    0.533803] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.533927] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, 
linear)
[    0.534015] NET: Registered protocol family 1
[    0.534020] NET: Registered protocol family 44
[    0.559567] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x6a0 took 24926 
usecs
[    0.579562] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x6a0 took 19401 
usecs
[    0.599562] pci 0000:00:14.5: quirk_usb_early_handoff+0x0/0x6a0 took 19399 
usecs
[    0.619561] pci 0000:00:16.0: quirk_usb_early_handoff+0x0/0x6a0 took 19517 
usecs
[    0.619697] pci 0000:01:00.0: Video device with shadowed ROM at [mem 
0x000c0000-0x000dffff]
[    0.619705] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    0.619877] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
[    0.619881] PCI: CLS 64 bytes, default 64
[    0.619984] Trying to unpack rootfs image as initramfs...
[    1.091226] Freeing initrd memory: 40540K
[    1.092081] PCI-DMA: Disabling AGP.
[    1.092143] PCI-DMA: aperture base @ 90000000 size 65536 KB
[    1.092143] PCI-DMA: using GART IOMMU.
[    1.092145] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    1.094563] amd_uncore: AMD NB counters detected
[    1.094726] LVT offset 0 assigned for vector 0x400
[    1.094796] perf: AMD IBS detected (0x000000ff)
[    1.094865] check: Scanning for low memory corruption every 60 seconds
[    1.096191] Initialise system trusted keyrings
[    1.096200] Key type blacklist registered
[    1.096245] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    1.097677] zbud: loaded
[    1.098033] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.098209] fuse: init (API version 7.31)
[    1.098319] Platform Keyring initialized
[    1.102249] Key type asymmetric registered
[    1.102250] Asymmetric key parser 'x509' registered
[    1.102258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 
244)
[    1.102317] io scheduler mq-deadline registered
[    1.103159] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.103218] efifb: probing for efifb
[    1.103230] efifb: No BGRT, not showing boot graphics
[    1.103231] efifb: framebuffer at 0xc0000000, using 3072k, total 3072k
[    1.103231] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    1.103232] efifb: scrolling: redraw
[    1.103233] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.103279] fbcon: Deferring console take-over
[    1.103280] fb0: EFI VGA frame buffer device
[    1.103361] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.103373] ACPI: Power Button [PWRB]
[    1.103407] input: Power Button as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    1.103412] ACPI: Power Button [PWRF]
[    1.104147] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.124578] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 
16550A
[    1.126291] Linux agpgart interface v0.103
[    1.128561] loop: module loaded
[    1.128765] libphy: Fixed MDIO Bus: probed
[    1.128765] tun: Universal TUN/TAP device driver, 1.6
[    1.128792] PPP generic driver version 2.4.2
[    1.128827] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.128829] ehci-pci: EHCI PCI platform driver
[    1.128942] QUIRK: Enable AMD PLL fix
[    1.128962] ehci-pci 0000:00:12.2: EHCI Host Controller
[    1.128968] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus 
number 1
[    1.128971] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.128979] ehci-pci 0000:00:12.2: debug port 1
[    1.129015] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[    1.144939] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    1.144991] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, 
bcdDevice= 5.03
[    1.144992] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.144993] usb usb1: Product: EHCI Host Controller
[    1.144994] usb usb1: Manufacturer: Linux 5.3.0-61-generic ehci_hcd
[    1.144995] usb usb1: SerialNumber: 0000:00:12.2
[    1.145126] hub 1-0:1.0: USB hub found
[    1.145132] hub 1-0:1.0: 5 ports detected
[    1.145413] ehci-pci 0000:00:13.2: EHCI Host Controller
[    1.145417] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus 
number 2
[    1.145419] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.145427] ehci-pci 0000:00:13.2: debug port 1
[    1.145455] ehci-pci 0000:00:13.2: irq 21, io mem 0xfeb07000
[    1.160938] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    1.160983] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, 
bcdDevice= 5.03
[    1.160984] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.160985] usb usb2: Product: EHCI Host Controller
[    1.160986] usb usb2: Manufacturer: Linux 5.3.0-61-generic ehci_hcd
[    1.160987] usb usb2: SerialNumber: 0000:00:13.2
[    1.161104] hub 2-0:1.0: USB hub found
[    1.161109] hub 2-0:1.0: 5 ports detected
[    1.161333] ehci-pci 0000:00:16.2: EHCI Host Controller
[    1.161337] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus 
number 3
[    1.161339] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI 
dummy qh workaround
[    1.161347] ehci-pci 0000:00:16.2: debug port 1
[    1.161380] ehci-pci 0000:00:16.2: irq 23, io mem 0xfeb04000
[    1.176938] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    1.176982] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, 
bcdDevice= 5.03
[    1.176983] usb usb3: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.176984] usb usb3: Product: EHCI Host Controller
[    1.176985] usb usb3: Manufacturer: Linux 5.3.0-61-generic ehci_hcd
[    1.176986] usb usb3: SerialNumber: 0000:00:16.2
[    1.177102] hub 3-0:1.0: USB hub found
[    1.177107] hub 3-0:1.0: 4 ports detected
[    1.177223] ehci-platform: EHCI generic platform driver
[    1.177235] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.177239] ohci-pci: OHCI PCI platform driver
[    1.177338] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    1.177342] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus 
number 4
[    1.177361] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    1.240956] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, 
bcdDevice= 5.03
[    1.240958] usb usb4: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.240959] usb usb4: Product: OHCI PCI host controller
[    1.240960] usb usb4: Manufacturer: Linux 5.3.0-61-generic ohci_hcd
[    1.240961] usb usb4: SerialNumber: 0000:00:12.0
[    1.241080] hub 4-0:1.0: USB hub found
[    1.241087] hub 4-0:1.0: 5 ports detected
[    1.241291] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    1.241295] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus 
number 5
[    1.241316] ohci-pci 0000:00:13.0: irq 20, io mem 0xfeb08000
[    1.304954] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, 
bcdDevice= 5.03
[    1.304956] usb usb5: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.304957] usb usb5: Product: OHCI PCI host controller
[    1.304958] usb usb5: Manufacturer: Linux 5.3.0-61-generic ohci_hcd
[    1.304959] usb usb5: SerialNumber: 0000:00:13.0
[    1.305077] hub 5-0:1.0: USB hub found
[    1.305084] hub 5-0:1.0: 5 ports detected
[    1.305295] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    1.305299] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus 
number 6
[    1.305319] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    1.370595] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, 
bcdDevice= 5.03
[    1.370596] usb usb6: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.370597] usb usb6: Product: OHCI PCI host controller
[    1.370598] usb usb6: Manufacturer: Linux 5.3.0-61-generic ohci_hcd
[    1.370599] usb usb6: SerialNumber: 0000:00:14.5
[    1.370721] hub 6-0:1.0: USB hub found
[    1.370728] hub 6-0:1.0: 2 ports detected
[    1.370935] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    1.370939] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus 
number 7
[    1.370960] ohci-pci 0000:00:16.0: irq 22, io mem 0xfeb05000
[    1.434598] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, 
bcdDevice= 5.03
[    1.434600] usb usb7: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.434601] usb usb7: Product: OHCI PCI host controller
[    1.434602] usb usb7: Manufacturer: Linux 5.3.0-61-generic ohci_hcd
[    1.434603] usb usb7: SerialNumber: 0000:00:16.0
[    1.434723] hub 7-0:1.0: USB hub found
[    1.434730] hub 7-0:1.0: 4 ports detected
[    1.434870] ohci-platform: OHCI generic platform driver
[    1.434878] uhci_hcd: USB Universal Host Controller Interface driver
[    1.434984] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.434988] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus 
number 8
[    1.568865] xhci_hcd 0000:03:00.0: hcc params 0x0200e081 hci version 0x100 
quirks 0x0000000010000410
[    1.569078] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002, 
bcdDevice= 5.03
[    1.569079] usb usb8: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.569080] usb usb8: Product: xHCI Host Controller
[    1.569081] usb usb8: Manufacturer: Linux 5.3.0-61-generic xhci-hcd
[    1.569082] usb usb8: SerialNumber: 0000:03:00.0
[    1.569191] hub 8-0:1.0: USB hub found
[    1.569198] hub 8-0:1.0: 2 ports detected
[    1.569284] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    1.569287] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus 
number 9
[    1.569289] xhci_hcd 0000:03:00.0: Host supports USB 3.0 SuperSpeed
[    1.569325] usb usb9: We don't know the algorithms for LPM for this host, 
disabling LPM.
[    1.569346] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, 
bcdDevice= 5.03
[    1.569347] usb usb9: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.569348] usb usb9: Product: xHCI Host Controller
[    1.569349] usb usb9: Manufacturer: Linux 5.3.0-61-generic xhci-hcd
[    1.569350] usb usb9: SerialNumber: 0000:03:00.0
[    1.569420] hub 9-0:1.0: USB hub found
[    1.569427] hub 9-0:1.0: 2 ports detected
[    1.569566] i8042: PNP: No PS/2 controller found.
[    1.569628] mousedev: PS/2 mouse device common for all mice
[    1.569749] rtc_cmos 00:03: RTC can wake from S4
[    1.569869] rtc_cmos 00:03: registered as rtc0
[    1.569881] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, 
hpet irqs
[    1.569886] i2c /dev entries driver
[    1.569924] device-mapper: uevent: version 1.0.3
[    1.569974] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: 
dm-de...@redhat.com
[    1.569991] platform eisa.0: Probing EISA bus 0
[    1.569992] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    1.569993] platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.569995] platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.569996] platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.569996] platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.569997] platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.569998] platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.569999] platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.570000] platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.570001] platform eisa.0: EISA: Detected 0 cards
[    1.570127] ledtrig-cpu: registered to indicate activity on CPUs
[    1.570129] EFI Variables Facility v0.08 2004-May-17
[    1.577996] x86/pm: family 0x15 cpu detected, MSR saving is needed during 
suspending.
[    1.578165] NET: Registered protocol family 10
[    1.583698] Segment Routing with IPv6
[    1.583716] NET: Registered protocol family 17
[    1.583805] Key type dns_resolver registered
[    1.584902] RAS: Correctable Errors collector initialized.
[    1.584905] microcode: microcode updated early to new patch_level=0x06000852
[    1.584955] microcode: CPU0: patch_level=0x06000852
[    1.584962] microcode: CPU1: patch_level=0x06000852
[    1.584969] microcode: CPU2: patch_level=0x06000852
[    1.584975] microcode: CPU3: patch_level=0x06000852
[    1.584981] microcode: CPU4: patch_level=0x06000852
[    1.584987] microcode: CPU5: patch_level=0x06000852
[    1.584994] microcode: CPU6: patch_level=0x06000852
[    1.584997] microcode: CPU7: patch_level=0x06000852
[    1.585024] microcode: Microcode Update Driver: v2.2.
[    1.585032] sched_clock: Marking stable (1584845398, 174913)->(1812536205, 
-227515894)
[    1.585173] registered taskstats version 1
[    1.585181] Loading compiled-in X.509 certificates
[    1.586800] Loaded X.509 cert 'Build time autogenerated kernel key: 
cb9fb9e04c6e44a6d39fe4b4b740c450abe9c2e7'
[    1.586850] zswap: loaded using pool lzo/zbud
[    1.591538] Key type big_key registered
[    1.593878] Key type encrypted registered
[    1.593881] AppArmor: AppArmor sha1 policy hashing enabled
[    1.594108] integrity: Loading X.509 certificate: UEFI:db
[    1.595072] integrity: Loaded X.509 cert 'ASUSTeK MotherBoard SW Key 
Certificate: da83b990422ebc8c441f8d8b039a65a2'
[    1.595072] integrity: Loading X.509 certificate: UEFI:db
[    1.595292] integrity: Loaded X.509 cert 'ASUSTeK Notebook SW Key 
Certificate: b8e581e4df77a5bb4282d5ccfc00c071'
[    1.595292] integrity: Loading X.509 certificate: UEFI:db
[    1.595314] integrity: Loaded X.509 cert 'Microsoft Corporation UEFI CA 
2011: 13adbf4309bd82709c8cd54f316ed522988a1bd4'
[    1.595315] integrity: Loading X.509 certificate: UEFI:db
[    1.595333] integrity: Loaded X.509 cert 'Microsoft Windows Production PCA 
2011: a92902398e16c49778cd90f99e4f9ae17c55af53'
[    1.595333] integrity: Loading X.509 certificate: UEFI:db
[    1.595556] integrity: Loaded X.509 cert 'Canonical Ltd. Master Certificate 
Authority: ad91990bc22ab1f517048c23b6655a268e345a63'
[    1.596011] ima: No TPM chip found, activating TPM-bypass!
[    1.596014] ima: Allocated hash algorithm: sha1
[    1.596020] No architecture policies found
[    1.596027] evm: Initialising EVM extended attributes:
[    1.596027] evm: security.selinux
[    1.596028] evm: security.SMACK64
[    1.596028] evm: security.SMACK64EXEC
[    1.596028] evm: security.SMACK64TRANSMUTE
[    1.596029] evm: security.SMACK64MMAP
[    1.596029] evm: security.apparmor
[    1.596029] evm: security.ima
[    1.596030] evm: security.capability
[    1.596030] evm: HMAC attrs: 0x1
[    1.596341] PM:   Magic number: 8:235:901
[    1.596350] usb usb2-port2: hash matches
[    1.596363] clocksource clocksource0: hash matches
[    1.596476] rtc_cmos 00:03: setting system clock to 2020-06-25T19:53:59 UTC 
(1593114839)
[    1.596700] powernow_k8: This CPU is not supported anymore, using 
acpi-cpufreq instead.
[    1.597456] Lockdown: swapper/0: Hibernation is restricted; see man 
kernel_lockdown.7
[    1.599155] Freeing unused decrypted memory: 2040K
[    1.599778] Freeing unused kernel image memory: 2664K
[    1.638600] Write protecting the kernel read-only data: 22528k
[    1.639189] Freeing unused kernel image memory: 2008K
[    1.639553] Freeing unused kernel image memory: 1472K
[    1.650995] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.650997] Run /init as init process
[    1.714536] usb 4-3: new low-speed USB device number 2 using ohci-pci
[    1.739137] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, 
revision 0
[    1.739144] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port 
selection
[    1.739713] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 
0xb20
[    1.740189] ahci 0000:00:11.0: version 3.0
[    1.740431] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x14 
impl SATA mode
[    1.740434] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio 
slum part 
[    1.741131] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM 
control
[    1.741564] scsi host0: ahci
[    1.741915] scsi host1: ahci
[    1.742531] scsi host2: ahci
[    1.743144] libphy: r8169: probed
[    1.743595] r8169 0000:02:00.0 eth0: RTL8168f/8111f, 40:16:7e:e8:b5:2a, XID 
480, IRQ 41
[    1.743598] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx 
checksumming: ko]
[    1.744815] scsi host3: ahci
[    1.744962] scsi host4: ahci
[    1.745107] ata1: DUMMY
[    1.745108] ata2: DUMMY
[    1.745111] ata3: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b200 
irq 19
[    1.745112] ata4: DUMMY
[    1.745114] ata5: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b300 
irq 19
[    1.767541] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    1.934597] usb 4-3: New USB device found, idVendor=06a3, idProduct=8020, 
bcdDevice= 1.30
[    1.934599] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.934600] usb 4-3: Product: Saitek Eclipse Keyboard
[    1.934601] usb 4-3: Manufacturer: Chicony
[    1.950993] hidraw: raw HID events driver (C) Jiri Kosina
[    1.978571] usb 8-2: new high-speed USB device number 2 using xhci_hcd
[    1.986796] usbcore: registered new interface driver usbhid
[    1.986796] usbhid: USB HID core driver
[    2.004528] input: Chicony Saitek Eclipse Keyboard as 
/devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.0/0003:06A3:8020.0001/input/input2
[    2.062659] hid-generic 0003:06A3:8020.0001: input,hidraw0: USB HID v1.11 
Keyboard [Chicony Saitek Eclipse Keyboard] on usb-0000:00:12.0-3/input0
[    2.062843] input: Chicony Saitek Eclipse Keyboard Consumer Control as 
/devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:06A3:8020.0002/input/input3
[    2.110570] tsc: Refined TSC clocksource calibration: 4013.448 MHz
[    2.110585] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x39d9fc7d3d5, max_idle_ns: 440795308865 ns
[    2.110618] clocksource: Switched to clocksource tsc
[    2.122648] input: Chicony Saitek Eclipse Keyboard System Control as 
/devices/pci0000:00/0000:00:12.0/usb4/4-3/4-3:1.1/0003:06A3:8020.0002/input/input4
[    2.122743] hid-generic 0003:06A3:8020.0002: input,hiddev0,hidraw1: USB HID 
v1.11 Device [Chicony Saitek Eclipse Keyboard] on usb-0000:00:12.0-3/input1
[    2.204956] usb 8-2: New USB device found, idVendor=05e3, idProduct=0610, 
bcdDevice=90.30
[    2.204958] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.204959] usb 8-2: Product: USB2.0 Hub
[    2.204960] usb 8-2: Manufacturer: GenesysLogic
[    2.209078] hub 8-2:1.0: USB hub found
[    2.210562] hub 8-2:1.0: 4 ports detected
[    2.218586] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.220490] ata5.00: supports DRM functions and may not be fully accessible
[    2.220885] ata5.00: disabling queued TRIM support
[    2.220887] ata5.00: ATA-9: Samsung SSD 840 EVO 500GB, EXT0DB6Q, max UDMA/133
[    2.220888] ata5.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.221441] ata5.00: supports DRM functions and may not be fully accessible
[    2.221828] ata5.00: disabling queued TRIM support
[    2.222231] ata5.00: configured for UDMA/133
[    2.222563] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.222874] ata3.00: supports DRM functions and may not be fully accessible
[    2.223831] ata3.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT01B6Q, max 
UDMA/133
[    2.223832] ata3.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.226350] ata3.00: supports DRM functions and may not be fully accessible
[    2.229429] ata3.00: configured for UDMA/133
[    2.229616] scsi 2:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q 
PQ: 0 ANSI: 5
[    2.229790] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    2.229840] ata3.00: Enabling discard_zeroes_data
[    2.229903] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 
GiB)
[    2.229920] sd 2:0:0:0: [sda] Write Protect is off
[    2.229921] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.229938] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    2.229994] scsi 4:0:0:0: Direct-Access     ATA      Samsung SSD 840  DB6Q 
PQ: 0 ANSI: 5
[    2.230044] ata3.00: Enabling discard_zeroes_data
[    2.230267] sd 4:0:0:0: Attached scsi generic sg1 type 0
[    2.230346] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 
GiB)
[    2.230364] sd 4:0:0:0: [sdb] Write Protect is off
[    2.230365] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.230394] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    2.231394]  sda: sda1 sda2 < sda5 sda6 >
[    2.232461] ata3.00: Enabling discard_zeroes_data
[    2.232788]  sdb: sdb1 sdb2 sdb3 sdb4
[    2.233679] sd 2:0:0:0: [sda] supports TCG Opal
[    2.233681] sd 2:0:0:0: [sda] Attached SCSI disk
[    2.233727] sd 4:0:0:0: [sdb] supports TCG Opal
[    2.233728] sd 4:0:0:0: [sdb] Attached SCSI disk
[    2.268636] random: fast init done
[    2.270728] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.270913] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.270953] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.323220] usb 9-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    2.360021] usb 9-2: New USB device found, idVendor=05e3, idProduct=0612, 
bcdDevice=90.30
[    2.360022] usb 9-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.360023] usb 9-2: Product: USB3.0 Hub
[    2.360024] usb 9-2: Manufacturer: GenesysLogic
[    2.370210] hub 9-2:1.0: USB hub found
[    2.370930] hub 9-2:1.0: 4 ports detected
[    2.514567] usb 4-4: new full-speed USB device number 3 using ohci-pci
[    2.522570] usb 8-2.1: new full-speed USB device number 3 using xhci_hcd
[    2.656275] usb 8-2.1: New USB device found, idVendor=046d, idProduct=0a4d, 
bcdDevice= 1.20
[    2.656277] usb 8-2.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    2.656278] usb 8-2.1: Product: Logitech G430 Gaming Headset
[    2.656279] usb 8-2.1: Manufacturer: Logitech
[    2.661972] input: Logitech Logitech G430 Gaming Headset as 
/devices/pci0000:00/0000:00:07.0/0000:03:00.0/usb8/8-2/8-2.1/8-2.1:1.3/0003:046D:0A4D.0003/input/input5
[    2.717634] usb 4-4: New USB device found, idVendor=046d, idProduct=c332, 
bcdDevice= 3.01
[    2.717635] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.717636] usb 4-4: Product: Gaming Mouse G502
[    2.717637] usb 4-4: Manufacturer: Logitech
[    2.717638] usb 4-4: SerialNumber: 0A72354D3236
[    2.718668] hid-generic 0003:046D:0A4D.0003: input,hidraw2: USB HID v1.00 
Device [Logitech Logitech G430 Gaming Headset] on usb-0000:03:00.0-2.1/input3
[    2.727886] input: Logitech Gaming Mouse G502 as 
/devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.0/0003:046D:C332.0004/input/input6
[    2.727983] hid-generic 0003:046D:C332.0004: input,hidraw3: USB HID v1.11 
Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.0-4/input0
[    2.734147] input: Logitech Gaming Mouse G502 Keyboard as 
/devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C332.0005/input/input7
[    2.790688] input: Logitech Gaming Mouse G502 Consumer Control as 
/devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C332.0005/input/input8
[    2.790740] input: Logitech Gaming Mouse G502 System Control as 
/devices/pci0000:00/0000:00:12.0/usb4/4-4/4-4:1.1/0003:046D:C332.0005/input/input9
[    2.790837] hid-generic 0003:046D:C332.0005: input,hiddev1,hidraw4: USB HID 
v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.0-4/input1
[    3.146567] usb 1-5: new high-speed USB device number 4 using ehci-pci
[    3.311736] usb 1-5: New USB device found, idVendor=0781, idProduct=5530, 
bcdDevice= 1.00
[    3.311737] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.311738] usb 1-5: Product: Cruzer
[    3.311739] usb 1-5: Manufacturer: SanDisk
[    3.311740] usb 1-5: SerialNumber: 4C530001130517110383
[    3.601763] usb-storage 1-5:1.0: USB Mass Storage device detected
[    3.601885] scsi host5: usb-storage 1-5:1.0
[    3.601953] usbcore: registered new interface driver usb-storage
[    3.603117] usbcore: registered new interface driver uas
[    3.642154] fbcon: Taking over console
[    3.642251] Console: switching to colour frame buffer device 128x48
[    3.646476] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: 
(null)
[    3.764179] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT 
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS 
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 
default-hierarchy=hybrid)
[    3.782795] systemd[1]: Detected architecture x86-64.
[    3.784054] systemd[1]: Set hostname to <kestrel>.
[    3.784827] Lockdown: systemd: /dev/mem,kmem,port is restricted; see man 
kernel_lockdown.7
[    3.863655] systemd[1]: Reached target User and Group Name Lookups.
[    3.863710] systemd[1]: Reached target Remote File Systems.
[    3.863902] systemd[1]: Created slice User and Session Slice.
[    3.863943] systemd[1]: Started Forward Password Requests to Wall Directory 
Watch.
[    3.864088] systemd[1]: Set up automount Arbitrary Executable File Formats 
File System Automount Point.
[    3.864205] systemd[1]: Created slice System Slice.
[    3.864258] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    3.880205] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[    3.882312] lp: driver loaded but no devices found
[    3.890093] ppdev: user-space parallel port driver
[    3.982575] Adding 2097148k swap on /swapfile.  Priority:-2 extents:6 
across:2260988k SSFS
[    4.016184] systemd-journald[375]: Received request to flush runtime journal 
from PID 1
[    4.091309] cfg80211: Loading compiled-in X.509 certificates for regulatory 
database
[    4.091553] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.123884] Intel(R) Wireless WiFi driver for Linux
[    4.123886] Copyright(c) 2003- 2015 Intel Corporation
[    4.124004] iwlwifi 0000:04:00.0: enabling device (0000 -> 0002)
[    4.124139] iwlwifi 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM 
control
[    4.127666] iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1 op_mode 
iwldvm
[    4.160071] snd_hda_intel 0000:01:00.1: enabling device (0000 -> 0002)
[    4.160156] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[    4.160157] snd_hda_intel 0000:01:00.1: Force to non-snoop mode
[    4.160965] snd_hda_intel 0000:06:00.1: enabling device (0000 -> 0002)
[    4.161024] snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
[    4.161026] snd_hda_intel 0000:06:00.1: Force to non-snoop mode
[    4.191119] [drm] radeon kernel modesetting enabled.
[    4.193465] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 
0xc0000000 -> 0xcfffffff
[    4.193467] radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 
0xfea00000 -> 0xfea3ffff
[    4.193468] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[    4.193469] fb0: switching to radeondrmfb from EFI VGA
[    4.195428] mc: Linux media interface: v0.10
[    4.195612] Console: switching to colour dummy device 80x25
[    4.195629] radeon 0000:01:00.0: vgaarb: deactivate vga console
[    4.195919] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 
0x174B:0x3001 0x00).
[    4.196031] ATOM BIOS: Tahiti
[    4.196070] [drm] Changing default dispclk from 500Mhz to 600Mhz
[    4.196112] radeon 0000:01:00.0: VRAM: 3072M 0x0000000000000000 - 
0x00000000BFFFFFFF (3072M used)
[    4.196114] radeon 0000:01:00.0: GTT: 2048M 0x00000000C0000000 - 
0x000000013FFFFFFF
[    4.196118] [drm] Detected VRAM RAM=3072M, BAR=256M
[    4.196119] [drm] RAM width 384bits DDR
[    4.196187] cryptd: max_cpu_qlen set to 1000
[    4.196190] [TTM] Zone  kernel: Available graphics memory: 16393858 KiB
[    4.196194] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    4.196195] [TTM] Initializing pool allocator
[    4.196208] [TTM] Initializing DMA pool allocator
[    4.196229] [drm] radeon: 3072M of VRAM memory ready
[    4.196230] [drm] radeon: 2048M of GTT memory ready.
[    4.196239] [drm] Loading tahiti Microcode
[    4.197654] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    4.197656] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    4.197657] iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    4.197658] iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Advanced-N 
6205 AGN, REV=0xB0
[    4.199749] input: HDA ATI HDMI HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input12
[    4.199902] input: HDA ATI HDMI HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input13
[    4.199957] input: HDA ATI HDMI HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input14
[    4.200051] input: HDA ATI HDMI HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input15
[    4.200114] asus_wmi: ASUS WMI generic driver loaded
[    4.200160] input: HDA ATI HDMI HDMI/DP,pcm=10 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input16
[    4.200273] input: HDA ATI HDMI HDMI/DP,pcm=11 as 
/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input17
[    4.202582] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: 
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    4.202583] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[    4.202585] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x1b/0x0/0x0/0x0/0x0)
[    4.202585] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    4.202586] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    4.202587] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    4.202588] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    4.202590] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    4.202590] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    4.206464] input: HDA ATI HDMI HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:15.0/0000:06:00.1/sound/card2/input18
[    4.206562] input: HDA ATI HDMI HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:15.0/0000:06:00.1/sound/card2/input19
[    4.206656] input: HDA ATI HDMI HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:15.0/0000:06:00.1/sound/card2/input20
[    4.206723] input: HDA ATI HDMI HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:15.0/0000:06:00.1/sound/card2/input21
[    4.206776] input: HDA ATI HDMI HDMI/DP,pcm=10 as 
/devices/pci0000:00/0000:00:15.0/0000:06:00.1/sound/card2/input22
[    4.206821] input: HDA ATI HDMI HDMI/DP,pcm=11 as 
/devices/pci0000:00/0000:00:15.0/0000:06:00.1/sound/card2/input23
[    4.212693] [drm] Internal thermal controller with fan control
[    4.218884] asus_wmi: Initialization: 0x0
[    4.218925] asus_wmi: BIOS WMI version: 0.9
[    4.219003] asus_wmi: SFUN value: 0x0
[    4.219005] eeepc-wmi eeepc-wmi: Detected ASUSWMI, use DCTS
[    4.219709] input: Eee PC WMI hotkeys as 
/devices/platform/eeepc-wmi/input/input29
[    4.219845] asus_wmi: Number of fans: 1
[    4.221761] [drm] radeon: dpm initialized
[    4.222810] input: HDA ATI SB Front Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input24
[    4.222948] input: HDA ATI SB Rear Mic as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input25
[    4.223053] input: HDA ATI SB Line as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input26
[    4.223995] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    4.224003] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    4.226368] [drm] PCIE gen 2 link speeds already enabled
[    4.230607] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.230901] input: HDA ATI SB Line Out as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input27
[    4.231112] input: HDA ATI SB Front Headphone as 
/devices/pci0000:00/0000:00:14.2/sound/card0/input28
[    4.260312] AVX version of gcm_enc/dec engaged.
[    4.260314] AES CTR mode by8 optimization enabled
[    4.297625] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[    4.297749] radeon 0000:01:00.0: WB enabled
[    4.297753] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 
0x00000000c0000c00 and cpu addr 0x(____ptrval____)
[    4.297755] radeon 0000:01:00.0: fence driver on ring 1 use gpu addr 
0x00000000c0000c04 and cpu addr 0x(____ptrval____)
[    4.297756] radeon 0000:01:00.0: fence driver on ring 2 use gpu addr 
0x00000000c0000c08 and cpu addr 0x(____ptrval____)
[    4.297758] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 
0x00000000c0000c0c and cpu addr 0x(____ptrval____)
[    4.297760] radeon 0000:01:00.0: fence driver on ring 4 use gpu addr 
0x00000000c0000c10 and cpu addr 0x(____ptrval____)
[    4.297967] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 
0x0000000000075a18 and cpu addr 0x(____ptrval____)
[    4.304446] usbcore: registered new interface driver snd-usb-audio
[    4.317946] radeon 0000:01:00.0: fence driver on ring 6 use gpu addr 
0x00000000c0000c18 and cpu addr 0x(____ptrval____)
[    4.317949] radeon 0000:01:00.0: fence driver on ring 7 use gpu addr 
0x00000000c0000c1c and cpu addr 0x(____ptrval____)
[    4.318476] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    4.318477] [drm] Driver supports precise vblank timestamp query.
[    4.318479] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    4.318543] radeon 0000:01:00.0: radeon: using MSI.
[    4.318569] [drm] radeon: irq initialized.
[    4.485808] [drm] ring test on 0 succeeded in 1 usecs
[    4.485813] [drm] ring test on 1 succeeded in 1 usecs
[    4.485816] [drm] ring test on 2 succeeded in 1 usecs
[    4.485822] [drm] ring test on 3 succeeded in 3 usecs
[    4.485827] [drm] ring test on 4 succeeded in 3 usecs
[    4.607093] scsi 5:0:0:0: Direct-Access     SanDisk  Cruzer           1.00 
PQ: 0 ANSI: 6
[    4.607283] sd 5:0:0:0: Attached scsi generic sg2 type 0
[    4.607949] sd 5:0:0:0: [sdc] 62521344 512-byte logical blocks: (32.0 
GB/29.8 GiB)
[    4.608944] sd 5:0:0:0: [sdc] Write Protect is off
[    4.608945] sd 5:0:0:0: [sdc] Mode Sense: 43 00 00 00
[    4.609945] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, 
doesn't support DPO or FUA
[    4.615207]  sdc: sdc1
[    4.618318] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[    4.671475] [drm] ring test on 5 succeeded in 2 usecs
[    4.671479] [drm] UVD initialized successfully.
[    4.780692] [drm] ring test on 6 succeeded in 20 usecs
[    4.780709] [drm] ring test on 7 succeeded in 7 usecs
[    4.780710] [drm] VCE initialized successfully.
[    4.781032] [drm] ib test on ring 0 succeeded in 0 usecs
[    4.781065] [drm] ib test on ring 1 succeeded in 0 usecs
[    4.781097] [drm] ib test on ring 2 succeeded in 0 usecs
[    4.781130] [drm] ib test on ring 3 succeeded in 0 usecs
[    4.781160] [drm] ib test on ring 4 succeeded in 0 usecs
[    4.989585] iwlwifi 0000:04:00.0 wlp4s0: renamed from wlan0
[    5.037081] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: 
(null)
[    5.048106] kvm: Nested Virtualization enabled
[    5.048117] kvm: Nested Paging enabled
[    5.051259] MCE: In-kernel MCE decoding enabled.
[    5.053018] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.053020] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.098962] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.098963] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.106790] audit: type=1400 audit(1593114843.006:2): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=845 
comm="apparmor_parser"
[    5.106930] audit: type=1400 audit(1593114843.006:3): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=841 
comm="apparmor_parser"
[    5.106935] audit: type=1400 audit(1593114843.006:4): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_filter" pid=841 
comm="apparmor_parser"
[    5.106937] audit: type=1400 audit(1593114843.006:5): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="man_groff" pid=841 
comm="apparmor_parser"
[    5.107255] audit: type=1400 audit(1593114843.006:6): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/snapd/snap-confine" pid=842 comm="apparmor_parser"
[    5.107260] audit: type=1400 audit(1593114843.006:7): apparmor="STATUS" 
operation="profile_load" profile="unconfined" 
name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=842 
comm="apparmor_parser"
[    5.108714] audit: type=1400 audit(1593114843.006:8): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" 
pid=843 comm="apparmor_parser"
[    5.108799] audit: type=1400 audit(1593114843.006:9): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=847 
comm="apparmor_parser"
[    5.109650] audit: type=1400 audit(1593114843.006:10): apparmor="STATUS" 
operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=838 
comm="apparmor_parser"
[    5.150927] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.150929] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.203140] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.203142] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.250950] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.250952] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.294902] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.294904] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.342907] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.342909] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.398899] EDAC amd64: Node 0: DRAM ECC disabled.
[    5.398901] EDAC amd64: ECC disabled in the BIOS or no ECC capability, 
module will not load.
                Either enable ECC checking or force module loading by setting 
'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.415165] RTL8211E Gigabit Ethernet r8169-200:00: attached PHY driver 
[RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=r8169-200:00, irq=IGNORE)
[    5.474585] [drm] ib test on ring 5 succeeded
[    5.604134] r8169 0000:02:00.0 enp2s0: Link is Down
[    5.621243] iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
[    5.918566] iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
[    5.982580] [drm] ib test on ring 6 succeeded
[    6.494588] [drm] ib test on ring 7 succeeded
[    6.495577] [drm] Radeon Display Connectors
[    6.495578] [drm] Connector 0:
[    6.495578] [drm]   DP-1
[    6.495579] [drm]   HPD5
[    6.495580] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 
0x653c
[    6.495580] [drm]   Encoders:
[    6.495581] [drm]     DFP1: INTERNAL_UNIPHY2
[    6.495581] [drm] Connector 1:
[    6.495581] [drm]   DP-2
[    6.495582] [drm]   HPD4
[    6.495583] [drm]   DDC: 0x6540 0x6540 0x6544 0x6544 0x6548 0x6548 0x654c 
0x654c
[    6.495583] [drm]   Encoders:
[    6.495583] [drm]     DFP2: INTERNAL_UNIPHY2
[    6.495584] [drm] Connector 2:
[    6.495584] [drm]   HDMI-A-1
[    6.495584] [drm]   HPD1
[    6.495585] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 
0x656c
[    6.495586] [drm]   Encoders:
[    6.495586] [drm]     DFP3: INTERNAL_UNIPHY1
[    6.495586] [drm] Connector 3:
[    6.495587] [drm]   DVI-I-1
[    6.495587] [drm]   HPD3
[    6.495588] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 
0x658c
[    6.495588] [drm]   Encoders:
[    6.495589] [drm]     DFP4: INTERNAL_UNIPHY
[    6.495589] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    6.495590] [drm] Connector 4:
[    6.495590] [drm]   DVI-D-1
[    6.495591] [drm]   HPD6
[    6.495591] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 
0x655c
[    6.495592] [drm]   Encoders:
[    6.495592] [drm]     DFP5: INTERNAL_UNIPHY1
[    6.527281] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker 
allocation for ELD
[    6.561077] snd_hda_codec_hdmi hdaudioC1D0: HDMI ATI/AMD: no speaker 
allocation for ELD
[    6.578051] [drm] fb mappable at 0xC05E1000
[    6.578052] [drm] vram apper at 0xC0000000
[    6.578052] [drm] size 9216000
[    6.578053] [drm] fb depth is 24
[    6.578053] [drm]    pitch is 7680
[    6.578151] fbcon: radeondrmfb (fb0) is primary device
[    6.578253] Console: switching to colour frame buffer device 240x75
[    6.578284] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    6.590582] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on 
minor 0
[    6.590661] radeon 0000:06:00.0: remove_conflicting_pci_framebuffers: bar 0: 
0xb0000000 -> 0xbfffffff
[    6.590663] radeon 0000:06:00.0: remove_conflicting_pci_framebuffers: bar 2: 
0xfe700000 -> 0xfe73ffff
[    6.590678] radeon 0000:06:00.0: enabling device (0000 -> 0003)
[    6.683724] [drm:radeon_dp_link_train [radeon]] *ERROR* channel eq failed: 5 
tries
[    6.683752] [drm:radeon_dp_link_train [radeon]] *ERROR* channel eq failed
[    6.769580] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery tried 
5 times
[    6.769608] [drm:radeon_dp_link_train [radeon]] *ERROR* clock recovery failed
[    6.770756] [drm] initializing kernel modesetting (TAHITI 0x1002:0x6798 
0x174B:0x3001 0x00).
[    6.902285] ATOM BIOS: Tahiti
[    6.902308] [drm] GPU not posted. posting now...
[    6.911717] [drm] Changing default dispclk from 500Mhz to 600Mhz
[    6.911726] radeon 0000:06:00.0: VRAM: 3072M 0x0000000000000000 - 
0x00000000BFFFFFFF (3072M used)
[    6.911728] radeon 0000:06:00.0: GTT: 2048M 0x00000000C0000000 - 
0x000000013FFFFFFF
[    6.911731] [drm] Detected VRAM RAM=3072M, BAR=256M
[    6.911731] [drm] RAM width 384bits DDR
[    6.911738] [drm] radeon: 3072M of VRAM memory ready
[    6.911739] [drm] radeon: 2048M of GTT memory ready.
[    6.911750] [drm] Loading tahiti Microcode
[    6.911758] [drm] Internal thermal controller with fan control
[    6.918210] [drm] radeon: dpm initialized
[    6.919007] [drm] Found VCE firmware/feedback version 50.0.1 / 17!
[    6.919013] [drm] GART: num cpu pages 524288, num gpu pages 524288
[    6.920911] [drm] PCIE gen 2 link speeds already enabled
[    6.930175] [drm] PCIE GART of 2048M enabled (table at 0x00000000001D6000).
[    6.930294] radeon 0000:06:00.0: WB enabled
[    6.930296] radeon 0000:06:00.0: fence driver on ring 0 use gpu addr 
0x00000000c0000c00 and cpu addr 0x(____ptrval____)
[    6.930298] radeon 0000:06:00.0: fence driver on ring 1 use gpu addr 
0x00000000c0000c04 and cpu addr 0x(____ptrval____)
[    6.930299] radeon 0000:06:00.0: fence driver on ring 2 use gpu addr 
0x00000000c0000c08 and cpu addr 0x(____ptrval____)
[    6.930301] radeon 0000:06:00.0: fence driver on ring 3 use gpu addr 
0x00000000c0000c0c and cpu addr 0x(____ptrval____)
[    6.930302] radeon 0000:06:00.0: fence driver on ring 4 use gpu addr 
0x00000000c0000c10 and cpu addr 0x(____ptrval____)
[    6.932625] radeon 0000:06:00.0: fence driver on ring 5 use gpu addr 
0x0000000000075a18 and cpu addr 0x(____ptrval____)
[    6.953475] radeon 0000:06:00.0: fence driver on ring 6 use gpu addr 
0x00000000c0000c18 and cpu addr 0x(____ptrval____)
[    6.953477] radeon 0000:06:00.0: fence driver on ring 7 use gpu addr 
0x00000000c0000c1c and cpu addr 0x(____ptrval____)
[    6.953479] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.953479] [drm] Driver supports precise vblank timestamp query.
[    6.953480] radeon 0000:06:00.0: radeon: MSI limited to 32-bit
[    6.953521] radeon 0000:06:00.0: radeon: using MSI.
[    6.953551] [drm] radeon: irq initialized.
[    7.156876] [drm] ring test on 0 succeeded in 1 usecs
[    7.156881] [drm] ring test on 1 succeeded in 1 usecs
[    7.156886] [drm] ring test on 2 succeeded in 1 usecs
[    7.156893] [drm] ring test on 3 succeeded in 4 usecs
[    7.156899] [drm] ring test on 4 succeeded in 4 usecs
[    7.342534] [drm] ring test on 5 succeeded in 2 usecs
[    7.342540] [drm] UVD initialized successfully.
[    7.451748] [drm] ring test on 6 succeeded in 17 usecs
[    7.451759] [drm] ring test on 7 succeeded in 3 usecs
[    7.451760] [drm] VCE initialized successfully.
[    7.452024] [drm] ib test on ring 0 succeeded in 0 usecs
[    7.452075] [drm] ib test on ring 1 succeeded in 0 usecs
[    7.452129] [drm] ib test on ring 2 succeeded in 0 usecs
[    7.452181] [drm] ib test on ring 3 succeeded in 0 usecs
[    7.452233] [drm] ib test on ring 4 succeeded in 0 usecs
[    8.126625] [drm] ib test on ring 5 succeeded
[    8.638653] [drm] ib test on ring 6 succeeded
[    9.124738] wlp4s0: authenticate with 70:54:25:42:2c:7c
[    9.127114] wlp4s0: send auth to 70:54:25:42:2c:7c (try 1/3)
[    9.150589] [drm] ib test on ring 7 succeeded
[    9.151417] [drm] Radeon Display Connectors
[    9.151418] [drm] Connector 0:
[    9.151418] [drm]   DP-3
[    9.151419] [drm]   HPD5
[    9.151420] [drm]   DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 
0x653c
[    9.151420] [drm]   Encoders:
[    9.151421] [drm]     DFP1: INTERNAL_UNIPHY2
[    9.151421] [drm] Connector 1:
[    9.151422] [drm]   HDMI-A-2
[    9.151422] [drm]   HPD1
[    9.151423] [drm]   DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 
0x656c
[    9.151423] [drm]   Encoders:
[    9.151423] [drm]     DFP2: INTERNAL_UNIPHY2
[    9.151424] [drm] Connector 2:
[    9.151424] [drm]   DVI-D-2
[    9.151424] [drm]   HPD6
[    9.151425] [drm]   DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 
0x655c
[    9.151426] [drm]   Encoders:
[    9.151426] [drm]     DFP3: INTERNAL_UNIPHY1
[    9.151426] [drm] Connector 3:
[    9.151427] [drm]   DVI-I-2
[    9.151427] [drm]   HPD3
[    9.151428] [drm]   DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 
0x658c
[    9.151428] [drm]   Encoders:
[    9.151429] [drm]     DFP4: INTERNAL_UNIPHY
[    9.151429] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    9.186864] wlp4s0: authenticated
[    9.186983] wlp4s0: waiting for beacon from 70:54:25:42:2c:7c
[    9.210875] [drm] Cannot find any crtc or sizes
[    9.211274] [drm] Initialized radeon 2.50.0 20080528 for 0000:06:00.0 on 
minor 1
[    9.215120] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroe...@suse.de>
[    9.215121] AMD-Vi: AMD IOMMUv2 functionality not available on this system
[    9.270101] [drm] amdgpu kernel modesetting enabled.
[    9.270176] CRAT table not found
[    9.270180] Virtual CRAT table created for CPU
[    9.270181] Parsing CRAT table with 1 nodes
[    9.270182] Creating topology SYSFS entries
[    9.270191] Topology: Add CPU node
[    9.270192] Finished initializing topology
[    9.290540] wlp4s0: associate with 70:54:25:42:2c:7c (try 1/3)
[    9.292784] wlp4s0: RX AssocResp from 70:54:25:42:2c:7c (capab=0x1511 
status=0 aid=5)
[    9.310589] wlp4s0: associated
[    9.327535] IPv6: ADDRCONF(NETDEV_CHANGE): wlp4s0: link becomes ready
[    9.390478] wlp4s0: Limiting TX power to 127 (127 - 0) dBm as advertised by 
70:54:25:42:2c:7c
[   10.286894] [drm] Cannot find any crtc or sizes
[   11.235725] retire_capture_urb: 23 callbacks suppressed
[   19.528656] random: crng init done
[   19.528658] random: 7 urandom warning(s) missed due to ratelimiting
[   21.710598] radeon_dp_aux_transfer_native: 200 callbacks suppressed
[   24.646747] rfkill: input handler disabled

Reply via email to