We aren't really using ours yet except for speed tests. But I only have
1 FCS error on our MT port our EPC is connected to. Been that way all
day and I have been doing speed tests for half of it. The EPC has been
connected for a week plus by now at least.
Thanks,
Tristan Johnson
Owner
www.wirelessdatanet.net
309-893-4152
------ Original Message ------
From: "Nathan Anderson" <nath...@fsr.com>
To: "telrad@wispa.org" <telrad@wispa.org>
Sent: 1/31/2017 5:00:24 PM
Subject: Re: [Telrad] Ethernet RX FCS errors from BreezeWay?
Okay, so just to be clear, you are telling me that I'm not the only one
and that you are seeing this, too?
-- Nathan
-----Original Message-----
From: telrad-boun...@wispa.org [mailto:telrad-boun...@wispa.org] On
Behalf Of J Portman
Sent: Tuesday, January 31, 2017 2:32 PM
To: telrad@wispa.org
Subject: Re: [Telrad] Ethernet RX FCS errors from BreezeWay?
Of course Telrad says it is a Mikrotik issue. Funny, I move several
Terabytes
of data on a daily basis through Mikrotiks talking to a lot of
different
equipment, and none of my other vendors have this issue.
To get around it, we upgraded to 10G fiber ports and guess what, we get
FCS
errors on the freakin' fiber ports as well.
YMMV,
JP
On Mon, 30 Jan 2017 07:37:27 +0000, Nathan Anderson wrote
We have recently noticed a new problem: we have an access port on
our BreezeWay (in this case, so happens it's the BW's port 10, but
may not be relevant) that is plugged into a MikroTik CCR 1036. The
MikroTik is reporting that it is sporadically seeing FCS errors on
frames received from the BreezeWay. I have replaced the ethernet
cable and also tried moving to a different ethernet port on the CCR.
Neither has made a difference.
I'm wondering if there is any way I can see any ethernet stats or
diagnostic information from the BreezeWay's perspective. In my
poking around, so far I have come up empty.
I'm not necessarily convinced at this point that this is the
BreezeWay's fault, mind you. I'm just wondering if anybody else has
seen something similar, and how to best go about chasing this
problem down. My perception is that the CCRs in particular have had
a troubled history when it comes to its copper gig ports...search
for "Ubiquiti AirFiber MikroTik CCR" if you want some fun afternoon
light reading.
Thanks,
--
Nathan Anderson
First Step Internet, LLC
nath...@fsr.com
_______________________________________________
Telrad mailing list
Telrad@wispa.org
http://lists.wispa.org/mailman/listinfo/telrad
--
This message has been scanned by E.F.A. Project and is believed to
be clean.
Joe Portman
Alamo Broadband Inc.
www.alamobroadband.com
_______________________________________________
Telrad mailing list
Telrad@wispa.org
http://lists.wispa.org/mailman/listinfo/telrad
_______________________________________________
Telrad mailing list
Telrad@wispa.org
http://lists.wispa.org/mailman/listinfo/telrad
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
Telrad mailing list
Telrad@wispa.org
http://lists.wispa.org/mailman/listinfo/telrad