On Sun, May 20, 2012 at 10:00 PM, Walter Bender <[email protected]> wrote: > On Sat, May 19, 2012 at 12:32 PM, Daniel Drake <[email protected]> wrote: >> On Sat, Apr 28, 2012 at 4:17 PM, Tom Parker <[email protected]> wrote: >>> Details: >>> One of our XO-1.5s refused to fs-update os8, complaining about something to >>> do with the first block and erasing or something. Unfortunately I observed >>> this a few days ago and then when I came to re-visit, os8 just installed on >>> all the XOs, so I don’t know what happened there. >> >> Next time you see a fs-update related problem please note the firmware >> version. >> >> I suspect what might have happened is that the flash completed but it >> printed a misleading error (old firmware version). >> Then you rebooted, it upgraded the firmware, and when you tried again >> you were running a fixed firmware version. >> >>> poppy-copy (XO-1.5 B2) failed to boot after installing os8 complaining about >>> read only filesystems. re-flashing did not help. I haven’t looked in to this >>> in any detail. >> >> Would be interested in serial console logs from boot if you have time. >> >>> rosella (XO-1.5) has very very small fonts on os8, even after a reboot >> >> Where do you observe the small fonts? Can you post a screenshot? >> >>> Ivy (XO-1.5) had a very bad resume from suspend, the laptop locked up for so >>> long I thought it had crashed. I was about to hard reset it when processed >>> some of my keyboard input and locked again. Eventually it started behaving >>> normally but there was no eth0 for a few more minutes. After this it >>> appeared to happy. I have the whole /var/log/messages if anyone wants it, >>> relevant excerpt here: >> >> We have some issues with libertas on suspend/resume, hopefully to be >> fixed soon. Please keep testing. >> > > I've patched Measure to fix the problem with rapid pressing of the > radio buttons. > >>> Measure’s trigger doesn’t seem to work at all now. Also, if you reduce >>> either gain to zero the display stops updating until you turn off the >>> trigger. > > Will investigate this as per #2203
The freezing was due to a zero-dvide error. Still investigating the trigger bug. -walter > >>> Restoring the gain does not help. Measure uses about 15% cpu even >>> when it is hidden, maybe it should stop processing when in the background? > > Not clear that we want to do this if data is being captured. I suppose > I could check to see it capture is enabled and only hold onto the > device if it is. > >>> >>> The record feature doesn’t seem to do anything. >>> >>> Measure’s page on aslo points to http://wiki.laptop.org/go/Measure which >>> claims to be out of date and points back to aslo. Is there any up-to-date >>> documentation? >> >> Walter, please test/comment. >> >> Thanks, >> Daniel > > > > -- > Walter Bender > Sugar Labs > http://www.sugarlabs.org -- Walter Bender Sugar Labs http://www.sugarlabs.org _______________________________________________ Testing mailing list [email protected] http://lists.laptop.org/listinfo/testing
