On Sun, May 20, 2012 at 11:52 PM, Walter Bender <[email protected]> wrote: > On Sun, May 20, 2012 at 11:10 PM, Walter Bender <[email protected]> > wrote: >> On Sun, May 20, 2012 at 10:00 PM, Walter Bender <[email protected]> >> wrote: >>> On Sat, May 19, 2012 at 12:32 PM, Daniel Drake <[email protected]> wrote: >>>> On Sat, Apr 28, 2012 at 4:17 PM, Tom Parker <[email protected]> wrote: >>>>> Details: >>>>> One of our XO-1.5s refused to fs-update os8, complaining about something >>>>> to >>>>> do with the first block and erasing or something. Unfortunately I observed >>>>> this a few days ago and then when I came to re-visit, os8 just installed >>>>> on >>>>> all the XOs, so I don’t know what happened there. >>>> >>>> Next time you see a fs-update related problem please note the firmware >>>> version. >>>> >>>> I suspect what might have happened is that the flash completed but it >>>> printed a misleading error (old firmware version). >>>> Then you rebooted, it upgraded the firmware, and when you tried again >>>> you were running a fixed firmware version. >>>> >>>>> poppy-copy (XO-1.5 B2) failed to boot after installing os8 complaining >>>>> about >>>>> read only filesystems. re-flashing did not help. I haven’t looked in to >>>>> this >>>>> in any detail. >>>> >>>> Would be interested in serial console logs from boot if you have time. >>>> >>>>> rosella (XO-1.5) has very very small fonts on os8, even after a reboot >>>> >>>> Where do you observe the small fonts? Can you post a screenshot? >>>> >>>>> Ivy (XO-1.5) had a very bad resume from suspend, the laptop locked up for >>>>> so >>>>> long I thought it had crashed. I was about to hard reset it when processed >>>>> some of my keyboard input and locked again. Eventually it started behaving >>>>> normally but there was no eth0 for a few more minutes. After this it >>>>> appeared to happy. I have the whole /var/log/messages if anyone wants it, >>>>> relevant excerpt here: >>>> >>>> We have some issues with libertas on suspend/resume, hopefully to be >>>> fixed soon. Please keep testing. >>>> >>> >>> I've patched Measure to fix the problem with rapid pressing of the >>> radio buttons. >>> >>>>> Measure’s trigger doesn’t seem to work at all now. Also, if you reduce >>>>> either gain to zero the display stops updating until you turn off the >>>>> trigger. >>> >>> Will investigate this as per #2203
I think #2203 is fixed as well. Please test. regards. -walter >> >> The freezing was due to a zero-dvide error. Still investigating the trigger >> bug. > > Found a typo introduced a while back that had broken triggering. The > current version in git should work, but #2203 is not necessarily > fixed. > > Question: When I test on 1.75, I am only seeing data on one channel, > even in analog sound mode. Are you seeing the same? > > -walter > >> >> -walter >>> >>>>> Restoring the gain does not help. Measure uses about 15% cpu even >>>>> when it is hidden, maybe it should stop processing when in the background? >>> >>> Not clear that we want to do this if data is being captured. I suppose >>> I could check to see it capture is enabled and only hold onto the >>> device if it is. >>> >>>>> >>>>> The record feature doesn’t seem to do anything. >>>>> >>>>> Measure’s page on aslo points to http://wiki.laptop.org/go/Measure which >>>>> claims to be out of date and points back to aslo. Is there any up-to-date >>>>> documentation? >>>> >>>> Walter, please test/comment. >>>> >>>> Thanks, >>>> Daniel >>> >>> >>> >>> -- >>> Walter Bender >>> Sugar Labs >>> http://www.sugarlabs.org >> >> >> >> -- >> Walter Bender >> Sugar Labs >> http://www.sugarlabs.org > > > > -- > Walter Bender > Sugar Labs > http://www.sugarlabs.org -- Walter Bender Sugar Labs http://www.sugarlabs.org _______________________________________________ Testing mailing list [email protected] http://lists.laptop.org/listinfo/testing
