Excellent, that does make sense, will be a great help in trouble shooting. Andrew
On 26/02/11 11:18, Stacho Mudrak wrote: > This is the same problem. Adding line wall:invisible to both ends of > this simple scrap (scrapPlan1) ultimately solves the problem. Sorry for > late answer. I will try to fix it in the next snapshot. > > The problem is simple. When scanning outline, therion goes line by line. > If there is another line, starting at the same point, where another > ends, it continues this way. If there is none, it tries to find nearest > end line point. But it does not care, whether it is really end point - > or it just wall divided into two lines. I apologize for inconvenience. > > Best regards, S. > > > 2011/2/26 Footleg <drfootleg at gmail.com <mailto:drfootleg at gmail.com>> > > I have attached a very simple project showing the problem. There are > screen shots in the zip file too. Using the cave1.th2 file you get > the bad model. Note that it looks like the lox model has created a > wall between a line node in one wall and a line node in an > unconnected line node on the opposite wall. The wall in the Loch > screen shot appears to be passing through the cave centreline. > > By adding a bit of extra line to the end of one of the walls, as > shown in the ExtraLine.png, the lox model comes out correct. This is > in the cave2.th2 file. So use either cave1.th2 to reproduce the > problem, or cave2.th2 to see how it is fixed by adding a bit extra > on the end of one wall. > > All done using the current latest 5.3.6 update of Therion. > > Footleg > > > > On 25/02/11 17:49, lada at blazcata.cz <mailto:lada at blazcata.cz> > wrote: > > If you can send me your data I can help you with debugging. > Otherwise it is hard to say what is wrong. > Odesláno z mého bezdrátového zaÅÃzenà BlackBerry® > > -----Original Message----- > From: Footleg<drfootleg at gmail.com <mailto:drfootleg at > gmail.com>> > Sender: therion-bounces at speleo.sk > <mailto:therion-bounces at speleo.sk> > Date: Fri, 25 Feb 2011 17:08:25 > To: List for Therion users<therion at speleo.sk > <mailto:therion at speleo.sk>> > Reply-To: List for Therion users<therion at speleo.sk > <mailto:therion at speleo.sk>> > Subject: Re: [Therion] Lox Model showing walls from wrong side > > _______________________________________________ > Therion mailing list > Therion at speleo.sk <mailto:Therion at speleo.sk> > http://mailman.speleo.sk/mailman/listinfo/therion > > _______________________________________________ > Therion mailing list > Therion at speleo.sk <mailto:Therion at speleo.sk> > http://mailman.speleo.sk/mailman/listinfo/therion > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk <mailto:Therion at speleo.sk> > http://mailman.speleo.sk/mailman/listinfo/therion > > > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk <mailto:Therion at speleo.sk> > http://mailman.speleo.sk/mailman/listinfo/therion > > > > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion
