I think there were at least two issues raised in this thread, discussed below.
> This bug should be also fixed now in 5.3.8. If not, please let me know. >S. >> >> also noticed that splay shots are used for the "depth". >> it might make sense, but  i rather have the depth >> computed with the survey shots only. >> One My informal comparison of 5.3.8 outputs with 5.3.7 suggests that depth is now likely to be accounting for only the centreline survey shots, which I like (although this could perhaps one day be a user selectable option-both are useful for differing purposes?). >> > To my way of thinking, splay shots are not part of the survey length >> > (and >> > therefore should not be duplicate either), they are analogous to LRUD. >> >  IF >> > they are to be reported, they should be separately reported as 'total >> > splay >> > length' and 'number of splay stations' (could be further broken down >> > into >> > 'surface splays' and 'cave splays' if one was being picky). >> > >> > If there were to be a compromise for the sake of simplicity I would >> > prefer >> > that therion exclude splay information from all the reported statistics >> > (as >> > it ignores LRUD, which are really just special splay shots), >> > >> > Bruce >> > >> > Maybe this is what is wanted, but I personally think that the duplicate >> > value should be the amount taken off the length by the duplicate flag? >> > Maybe 2 figures would be better, duplicate length and duplicate splays. >> > >> > Andrew >> > Two It seems to me that the splay shot statistics are still mixed in with the centreline statistics- ie no change between 5.3.7 and 5.3.8. Perhaps this was not the 'bug' referred to above, and I suspect it might require a lot of work, but deserves consideration I think. Bruce
