Hi Jenny, I have a project where I do this. I think I copied the idea off Bruce. I've just taken another look at the files to see how it works. I have a map definition in my project which looks like this:
map CarcPlanCL -title "Carcavuezo centreline Plan" -projection plan 4ValleysCL #centreline survey endmap All my map definitions are in the Carc_Map-Complete.th file which is referenced in my survey in the master .th file of my project. That file imports a survey 3D file for the centreline. Note how the map defined above contains the name of the survey from my master file, rather than the name of a map or scrap. The master .th file contents are as follows: survey Carcavuezo survey 4ValleysCL import 0081_therion.3d -surveys use -cs EPSG:25830 endsurvey input Carc_MAP-Complete.th endsurvey ------------------------- All you need to do to include the entire centreline from the survey in the PDF is include the map CarcPlanCL in the map you are generating the PDF from (along with the other maps which contain the scraps you want to plot on the PDF. Just remember you cannot mix maps and scraps in a map definition, which is why I have the special map containing the survey rather than including the survey in my master map directly. Also remember in your thconfig file to specify which map is the master map to generate the PDF from (in my thconfig file I declare: select CarcavuezoPlan at Carcavuezo ) If you want to play with my complete project then you can check it out from the UK cave registry svn here: http://cave-registry.org.uk/svn/MatienzoCaves/5Valleys This particular project is part of a much larger one (the entire 5 valleys). You want to process the thconfig-carcavuezo project in the folder 5Valleys\Therion Drawings\0081_Carcavuezo Footleg On Mon, Oct 19, 2015 at 10:23 AM Martin Sluka <martinsluka at mac.com> wrote: > Jenny, > > It looks the problem is you want to mix maps defined from scraps and maps > defined from surveys. Try to draw âblindâ scraps only with stations and > generate map from scraps. > > As I may say, I newer tried to define map as this: > > map from_surveys_only.map > survey1 > survey 2 > endmap > > map from_scraps.map > scrap1 > scrap2 > endmap > > map all.map > map_from_surveys_only > map_from_scraps > endmap > > thconfig: > > select all.map > > m.s. > > > > 19. 10. 2015 v 6:23, Jenny Black <jenelopy at gmail.com>: > > > > Hi, > > > > I want to plot both the centreline for the entire cave and passages in > > the scraps I have drawn. I can do one at a time but can't figure out > > how to plot both. > > > > In my thconfig file I have: > > symbol-show point station > > symbol-show group cave-centreline > > symbol-show point station-name > > debug station-names > > > > so when I don't have any scraps, I get the centreline and stations > > nicely plotted for the entire cave, which is proving very helpful with > > figuring out where to break loops for my extended elevation. > > > > However, as soon as I add in my scraps, which I've been doing by adding: > > input 107ee_ropeless.th2 > > input 107ee_china_new.th2 > > input 107ee_oldroute.th2 > > to my .th file I can only see the centreline (and walls, etc) for the > > scraps of drawn and not the rest of the cave. > > > > I'm sure it is possible to plot the scraps *and* the entire > > centreline. I'm sure I read it on a mailing list post when I was > > looking fro something else, but I can't rmanage to re-find it. Can > > anyone help? > > > > In case it makes a difference, I am plotted an extended elevation and > > reading in survex data as a 3d file. > > > > Thanks, > > Jenny > > _______________________________________________ > > Therion mailing list > > Therion at speleo.sk > > http://mailman.speleo.sk/mailman/listinfo/therion > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20151019/283a746f/attachment.html>