Hi,
I usually do my surveys doing inverse measures. I go ahead by
positioning the points, and doing the measurements with the distoX2
looking back (inverse) and finally do the splay measurements at that
destination point. My assistant is in origin point, and don't have
survey experience, is only putting the target in the anterior point .
With this I get all the data (leg and from and to splays) to be able to
draw the sketches.
You can look a example the data results:
extend left
82 81 10.47 147.7 1.4
extend ignore
82 . 0.53 230.7 1.2
82 . 1.85 66.3 -6.5
82 . 1.19 45.5 60.1
82 . 0.65 300.5 -88.8
82 . 2.76 105.7 -5.8
82 . 4.54 127.2 -0.9
82 . 5.86 132.4 -2.1
82 . 1.52 182.2 -8.3
82 . 4.45 156.5 -3.0
82 . 2.62 20.4 -9.8
82 . 2.39 311.0 -6.3
82 . 3.95 324.1 -6.9
extend left
83 82 7.95 146.4 1.4
extend ignore
83 . 0.35 235.9 1.0
83 . 1.87 38.5 -6.1
83 . 0.94 5.9 76.3
83 . 1.06 40.4 -80.9
83 . 4.49 117.2 -5.0
83 . 2.61 85.7 16.9
83 . 2.87 107.9 -6.0
83 . 2.98 154.2 -11.3
83 . 3.94 148.4 -3.6
83 . 5.92 127.1 -5.7
83 . 3.67 327.8 -5.8
83 . 4.40 300.2 -12.5
83 . 2.65 334.7 -20.5
83 . 5.62 132.6 3.5
extend left
84 83 8.40 132.5 3.5
extend ignore
84 . 1.39 215.1 23.4
84 . 2.51 101.7 -0.8
84 . 1.89 195.1 67.5
84 . 2.00 100.7 -28.2
84 . 3.16 118.1 -2.7
84 . 4.68 149.7 1.0
84 . 5.15 62.5 2.7
84 . 2.12 33.9 -1.3
83 . 4.99 250.9 -7.6
extend left
85 84 5.03 234.4 -6.3
extend ignore
85 . 2.56 261.5 -0.7
85 . 1.34 276.4 31.0
85 . 1.05 282.5 -62.6
85 . 4.43 304.8 -1.1
85 . 5.80 314.2 -1.4
85 . 1.33 181.0 0.5
extend left
86 85 6.33 149.5 -2.0
extend ignore
86 . 1.19 252.8 -18.6
86 . 2.85 85.3 3.7
86 . 0.92 225.3 -84.7
86 . 2.23 136.3 10.5
86 . 3.96 135.4 -5.4
86 . 3.83 143.8 -8.1
86 . 2.25 203.4 -10.9
86 . 3.50 186.7 -8.6
extend left
87 86 3.05 187.0 -8.7
extend ignore
87 . 2.59 223.7 -18.5
87 . 1.09 32.0 -1.2
87 . 1.67 183.2 59.1
87 . 0.58 315.6 -83.5
extend right
88 87 7.46 330.8 -3.4
extend ignore
88 . 0.77 66.7 4.2
88 . 0.47 257.5 -7.8
88 . 2.56 326.1 74.5
88 . 0.41 247.0 -80.9
88 . 1.85 127.1 15.2
88 . 0.96 104.7 4.6
88 . 0.85 207.2 1.2
88 . 4.20 343.3 -16.6
extend right
89 88 2.20 349.0 -20.5
extend ignore
89 . 0.95 43.1 -5.6
89 . 0.72 62.1 82.7
89 . 0.39 99.4 -77.6
89 . 0.89 324.9 -26.4
89 . 1.43 359.5 -23.5
89 . 1.08 72.7 -9.7
89 . 1.59 105.4 -3.8
89 . 2.56 125.6 -5.7
extend right
90 89 1.39 300.3 -13.8
extend ignore
90 . 0.46 62.7 -3.4
90 . 0.50 245.3 1.2
90 . 0.48 246.5 70.4
90 . 0.70 300.2 -82.3
90 . 1.74 184.4 -12.0
90 . 3.09 169.6 -9.1
90 . 3.69 166.8 -8.2
90 . 2.02 152.3 -17.2
90 . 1.40 132.2 -19.0
extend right
91 90 5.71 340.7 6.0
extend ignore
91 . 0.96 37.0 2.2
91 . 1.04 40.9 58.3
91 . 0.29 34.5 -56.7
91 . 1.48 338.9 -0.1
91 . 0.99 331.4 2.8
91 . 1.07 3.2 3.6
91 . 3.51 345.8 0.1
extend right
92 91 2.04 305.9 4.0
extend ignore
92 . 1.47 305.9 -11.0
92 . 1.06 301.4 45.1
92 . 0.43 339.3 -76.8
92 . 1.17 348.7 1.3
92 . 0.56 16.6 -9.2
92 . 0.57 270.9 -8.5
92 . 1.99 270.1 -7.4
92 . 1.56 230.3 -14.0
extend right
83 92 4.24 71.7 18.0
extend ignore 83 92
extend left
93 87 3.12 123.4 7.5
extend ignore
93 . 1.79 225.3 -3.2
93 . 1.70 49.9 -3.0
93 . 1.18 100.0 78.0
93 . 3.21 169.9 -2.6
93 . 2.09 88.5 -2.4
93 . 2.36 14.0 -2.1
93 . 3.78 347.3 1.9
93 . 3.62 300.1 -2.1
93 . 2.32 278.7 -3.8
In this data I have a loop. The main passage is: 82-83-84-85-86-87-93.
And the secondary passage is: 87-88-89-90-91-92-83.
When I compile the data and produce a XVI file, Therion is making the
secondary passage the main centerline, breaking the main passage leg "87
93".
I have tried to break the secondary passage with "extend ignore"
commands and is unsuccessful. I also tried to rename the connection
station and make "equate" sentence, and also is unsuccessful. I have
also interchanged the from and to station order.
I thinks is a problem with the inverse legs data and the "extend ignore"
command.
To avoid the problem I rename the leg "83 92" to "83B 92" breaking the
loop at the secondary passage. To export the plan I put and "equate 83
83B", and to export the extended profile I comment this sentence. It
works but it is a bit cumbersome.
Someone has had similar problems with the "extend ignore" commands and
has found some solution for its correct use?
Best regards,
Evaristo
_______________________________________________
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion