Hi Martin - Thanks! This is much better, but still not what I want. I don't want the profile to fold back on itself at all. I want one continuous profile extending from OC5a on the left to G14 on the right. Is that possible?
If I draw them as "projection none", then two questions come up. First, if I put survey stations in the scrap will they be used to scale the drawing? Second, can two (or more) such scraps be joined? -- Bill Gee On Friday, September 6, 2019 10:26:52 AM CDT Martin Sluka via Therion wrote: > Hi Bill, > > it looks you have not defined „extend“ of centerline in your centerline data. > > Because extend right is default Therion will extend your stations form OC5a > to the right, but it has to close the loop and there should be the problem. > > Your scrap extended Profile-OC5a-G10 includes stations OC5a to G10, stations > OC5a-G are extended to East but stations C9 and C10 are extended to West. > > Try to divide that loop to two scraps from OC5a to G8 and G8 to G14 and add > extend commands. Not use join commands for first elevation export. > > extend right > OC5a G1 19.6 134 3.0 314 -3.0 1.0 9.8 18.7 3.5 > G1 G2 20.4 133 29.0 313 -28.0 3.0 6.6 17.3 4.2 > G2 G3 21.2 125 13.0 306 -13.0 2.3 3.0 9.3 6.4 > G3 G4 22.6 60 4.0 239 -5.0 6.2 2.0 4.8 2.4 > G4 G5 4.5 48 -10.0 228 10.0 2.6 1.7 1.2 0.3 > G5 G6 12.3 101 18.0 281 -18.0 1.5 1.5 7.2 0.3 > G6 G7 9.0 127 7.0 308 -7.0 7.3 16.2 5.1 2.0 > G7 G8 10.9 44 -8.0 225 8.0 12.8 10.4 4.1 2.3 > extend left > G8 G9 8.5 335 -15.0 157 16.0 8.5 27.4 2.7 3.1 > G9 G10 15.5 307 -1.0 128.5 1.0 3.4 3.9 0.7 0.8 > G10 G11 32.0 267 -1.5 88.5 2.0 7.4 5.6 0.5 1.0 > G11 G12 21.8 262 0.0 81 0.0 1.7 4.8 1.5 1.4 > G12 G13 5.7 246 6.0 - -6.0 1.8 3.0 1.0 2.0 > G13 G14 13.9 236 -61.0 57 62.0 - - - - > extend hide > G14 G1 5.9 - -32.0 220 32.0 - - - - > > flags splay > G1 G1a 12.9 200 -6.0 - 6.0 20.0 20.0 17.3 4.2 > G7 G7a 18.4 249 12.0 - -12.0 10.4 12.8 4.1 2.3 > flags not splay > > Add command select to your thconfig file > > source StarkCaverns.th > > select StarkCavernsProfiles@StarkCavernsProfiles > > > # Load the Metapost code for custom symbols > > and add to scrap G10-G14 (G8-G14) parameter -flip horizontal, because in > output it should be flipped. > > _______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion
