Over the weekend I left the XO unit running for 38 hours, with it installed in its "house" (No probing). The GPS receiver was tracking satellites at the start and also at the end of the run as verified by monitoring J5-2 w/VisualGPS. The Fault & No GPS LEDs never went out. I'm about to conclude that I have a defective unit and will order another unless anyone has any further suggestions (PLEASE)?
I see at least John A., Jim M., & Phil S. have working XO units. I have just reviewed all the emails on the RFTG units and believe I have tried all the previous suggestions. Any additional secrets to share??? Bob Martinson, N1VQR -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Phil Staton Sent: Thursday, February 01, 2007 6:53 PM To: time-nuts@febo.com Subject: [time-nuts] Lucent RFTG-m-XO Briefly: Leave it running for at least 24hrs. The 15MHz will slowly get on freq. Countup is available on 1pps socket. more when I have time _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
