Tom Van Baak said the following on 04/16/2007 05:41 PM: >> In that case the new firmware will not be compatible at all. The new >> hardware uses FTDI FT245R USB FIFO chip which has a parallel interface to >> the micro. Host side USB drivers make it appear like a virtual serial port, >> which is why all the serial port parameters can be ignored. >> >> Abdul >> >> >> Hi Abdul, >> >> got it. Any chance you will make a GPIB-to-RS-232 version for us legacy >> guys >> out there? >> >> thanks, >> Said > > Abdul, > > I very much second Said's request. There are plenty of > applications where the Prologix box would be used in an > embedded environment. USB is a very bad choice in this > case since it is a highly asymmetric interface (there are > a million USB devices but pretty much only a full-blown > PC can be a USB host). > > Allowing serial (RS232 or SPI or I2C) in addition to USB > is a big plus. I'm sorry to hear your new version can't be > hacked to support this. Do you have any extra pins on > your controller? Could it be extended to support a serial > interface? You can talk to Said or me offline if you want; > but you unnecessarily shrink your market if you drop a > serial interface.
I'll throw in a vote, too. While the USB version works OK for my application, an RS-232 version that had an identical API would be very useful. John _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts