); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED]
Nigel, Here is a link to a Motorola communications primer I wrote several years ago when I worked at Synergy Systems: http://www.synergy-gps.com/images/stories/ShopTalk/1oncore_serial_communicat ions.pdf I think a couple of the denizens of this list also have copies of most of my old docs on their websites. Anybody out there????? I don't remember where they are. Randy Warner Senior Applications Engineer Geodetics, Inc. 858.729.0872 __________________________________________________________________ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, July 17, 2007 5:39 PM To: time-nuts@febo.com Subject: Re: [time-nuts] Oncore VP problem ); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] In a message dated 17/07/2007 23:09:36 GMT Daylight Time, [EMAIL PROTECTED] writes: You should be able to restart the VP with the @@Cg command in the "Additional Message Window" in WinOncore12. The total command string is: @@Cg01<enter>. Note that with the VP this must be done after every receiver default or SelfTest. ---------- You will also encounter trouble trying to run a lot of the more esoteric 8 channel messages that the VP supported. WinOncore12 has no idea about what to do with these. Once again, Rick's software will come to the rescue. _________________________________________________________________ _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
