> This assumes you have a calibrated scanner and a calibrated printer. > I don't have an IT8.7 target or its equivalent to calibrate the scanner. > > Perhaps I should start there.... heck I'll just try and match it by eye. > > Jack
Jack, even if you had the "exact" rgb value of the original color, and if you intend to duplicate it on an inkjet printer you would have to tweak it anyway. Printer colors differ by small amounts from brand to brand of ink and even with same brand in different batches. Within Photoshop you can use the "replace color" to tweak a given (single) color. Regardless of how you do it, you have to sample printer output and match (tweak), to even to calibrate the printer using calibration standards. This gets you very close unless you have a super cheap scanner and printer and even with cheap hardware this allows you to accomplish the intended results. Phil _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.