Bruce/Magnus
Thank you for your comments.
Roy
----- Original Message -----
From: "Bruce Griffiths" <bruce.griffi...@xtra.co.nz>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Sent: Wednesday, May 20, 2009 12:42 AM
Subject: Re: [time-nuts] HP 5370B vs SR620
Hej Magnus
One issue is that the SR620 is still in production.
Thus obtaining spare parts may be a little easier than for the HP5370A.
Bruce
Magnus Danielson wrote:
Roy Phillips skrev:
Jim
I was interested to hear that you are very fond of your vintage
Counter (HP5370B), and I have downloaded the manual from the Agilent
website.
I recently purchased an HP 5335A, again a vintage model, and I have
yet to assess it completely - is the 5370B much superior ? The
facilities on the 5335A seem to be similar.
These are two different animals. I like my 5335A for its directness
and versatility, where as both 5370B and SR-620 takes a litte more
bending.
Resolution and jitter wise the 5370B outperforms the 5335A, and the
SR-620 outperforms the 5370B.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
