If you prefer to use "real" wires, instead of ribbon cable, you could cut up
a USB backplate fitted with a 10 way header plug, such as this one sold in
the UK by Maplin :- http://www.maplin.co.uk/Module.aspx?ModuleNo=46735
I used a Quad USB backplate fitted with 2 X 10 way headers myself, like this
one :- http://www.maplin.co.uk/Module.aspx?ModuleNo=99279 I had to dig out
the stopper in the pin 1 position. Also, as there are only 8 wires
connected, I moved the connector from pin 7 (ext c-field) to pin 1 (rf o/p).
----- Original Message -----
From: "Richard W. Solomon" <w1...@earthlink.net>
To: <time-nuts@febo.com>
Sent: Tuesday, July 14, 2009 2:31 PM
Subject: [time-nuts] EFRATOM LPRO-101 Connector
How do folks like to connect to this RbO ? Do they use a connector ?
Or just solder to the pins ?
If they use a Connector can you tell me the Make & Part Number ?
Thanks, Dick, W1KSZ
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
