Hi, Have another look at the spec, it has adjustable offset via a multi turn trimmer accessed through a hole in the front panel. I just saw your comment on cost, for $1000 dollars you can have mine, I'll even fit a ten-turn pit and dial for the offset if you wish. You can download the manual from the website.
Regards, Robert. --- On Fri, 24/7/09, Lux, James P (337C) <james.p....@jpl.nasa.gov> wrote: > From: Lux, James P (337C) <james.p....@jpl.nasa.gov> > Subject: Re: [time-nuts] adjustable gain/offset amplifiers > To: "Discussion of precise time and frequency measurement" > <time-nuts@febo.com> > Date: Friday, 24 July, 2009, 9:03 PM > -----Original Message----- > From: time-nuts-boun...@febo.com > [mailto:time-nuts-boun...@febo.com] > On Behalf Of Robert Atkinson > Sent: Friday, July 24, 2009 12:55 PM > To: Discussion of precise time and frequency measurement > Subject: Re: [time-nuts] adjustable gain/offset amplifiers > > > I have an EG&G (Now signal recovery) 5185 wideband > preamp that would suit. > see < http://www.signalrecovery.com/5185page.htm > This is > not a solitation to sell mine:-) They do a range of other > models. > > Robert G8RPI. > > Thanks.. getting closer to what I need.. It has the gain > and BW, but not the adjustable offset. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
