Peter Loron <[email protected]> wrote:
I have a HP 16700A logic analyzer that I'm trying to troubleshoot. I can get access to the console via the serial port, and I can see that it boots up normally, except that it fails to start the X server, and drops to a login prompt for which I have no credentials.
I "inherited" one of these at HP Labs, but I don't use it much any more. Yours looks pretty healthy, except for the display issue. (You are watching it boot up into HP-UX of course.) This is just a guess, but I'd try it with several different monitors. It may be that the server doesn't like the VESA DDI/DDC information it is seeing. You might also try using an XDMCP login. I vaguely recall that is supposed to work. But I'm not sure you can get this to work without being able to set it up on the console. (BTW, I was able to load a more recent software image than what was originally on my 16700A when I inherited it. I found it on the Agilent site, naturally. That was five or so years ago. You might want to check there.) -ch _______________________________________________ time-nuts mailing list -- [email protected] To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
