Dear time-nuts,
I've just bought a used LPRO-101 which should get a permanent home
inside an instrument rack. I've also found a very nice 1U high metal
case, and a fitting 24V 1U power supply - leaving plenty of room for a
distribution amp and a microcontroller to log things like lamp and Xtal
voltage.
The rackmount enclosure is 1U high, and seems to be made of 1mm thick
galvanized steel. Would that make a good enough baseplate for the LPRO?
Would I need to do anything to improve the thermal contact between the
rubidium oscillator and the baseplate, and if so, any recommendations on
what to use there? The LPRO "User's guide and integration guidelines"
recommend 2degC/W thermal resistance (for up to 50degC ambient), and
using some special thermal tape that will probably be very hard to get
at these days. If any of you has already put something like this
together, I'd be very interested in your suggestions.
Regards, Paul Boven - PE1NUT
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
