Hi I hear that the US ones look better than the Russian ones when you have them spinning around on a frozen pond. Nether one does a very good triple axle jump though. At least that's what I read on the internet....
--------------- There's always been a *lot* of debate about exactly what the source of humidity impact on the US built masers is. It's been talked about for at least 30 years. It's not real surprising if somebody somewhere has found the answer and fixed it. Bob -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of b...@lysator.liu.se Sent: Tuesday, March 02, 2010 8:05 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Vremya-ch Hydrogen Masers Hi, Local rumor said US H-Masers are much better humidity sensors than the russian made... ;-) -- Björn > Hi > > ....Or find a conveniently large dry cave to park it and only it in. > > At the very least you would want to accurately monitor power, humidity and > temperature. Much easier to correct problems that you can observe. > > Bob _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.