Could probably do it all with a Propeller.
Don
----- Original Message -----
From: "jimlux" <jim...@earthlink.net>
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Sent: Tuesday, May 25, 2010 9:36 PM
Subject: Re: [time-nuts] IRIG B
Bob Camp wrote:
Hi
Audio codecs (especially monophonic ones) are pretty cheap these days.
Depending on volume they can get to the sub $1 range. Even in small
quantity
they are below $4. That makes them a pretty tempting "front end" for a
send
/ receive box.
Bob
i would think, given that the audio carrier is 1kHz-ish, that almost any
of the small microcontrollers would work, using a single bit in/out with
some RC signal conditioning. Maybe a bit of a challenge for the receive..
you'd need two inputs with different resistors.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.