Joe, Will add you to my list for boards, perhaps someone else here can help with the PIC chips.
Stanley ----- Original Message ---- From: J. L. Trantham <jlt...@att.net> To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Fri, July 2, 2010 6:33:56 PM Subject: Re: [time-nuts] Pic programing for the PICTIC II I requested 4 boards and I will need 4 of the 16F688's. However, one of my goals for this is to learn to do the programming. Therefore, getting some 'pre-programmed' chips to compare with my own programmed chips will be very helpful. Joe -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Stanley Reynolds Sent: Friday, July 02, 2010 10:37 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Pic programing for the PICTIC II ----- Original Message ---- From: paul swed <paulsw...@gmail.com> To: Discussion of precise time and frequency measurement <time-nuts@febo.com> Sent: Fri, July 2, 2010 10:27:26 AM Subject: Re: [time-nuts] Pic programing for the PICTIC II Whats your board count so far?? 23 people my guess is 40-50 boards Better ? How many16f688s are we talking here? My thinking is less than 10 as only two people have asked. Don't know how many have not asked. Thanks <snip> _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.