Hi

It looks like it may be a while before the trim pots come in (12 weeks...).
The 3266X (side adjust rather than top adjust) is in stock. I'm not sure if
the layout is "side adjust" friendly or not.

Bob

-----Original Message-----
From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On
Behalf Of Bob Bownes
Sent: Friday, July 02, 2010 2:54 PM
To: Discussion of precise time and frequency measurement
Subject: Re: [time-nuts] Pic programing for the PICTIC II

Folks,

I put together a mouser 'project' with all of the parts. This means
you can just go to the mouser site and order all the parts for the
project. No need for anyone to do a group buy of parts, re-pack and
re-distribute them. Here's how to get to it:

To access the project, click on the url listed below or copy and paste
it into your web browser:

http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=c7ada9ced0

Or you can access the project by going to http://www.mouser.com/ and
click on the EZ Buy option on the top navigation bar. You can also
click on this link or copy and paste it into your browser:
http://www.mouser.com/Tools/Tools.aspx. Then enter the following
access number listed below into the Project Access ID function.

c7ada9ced0


Total cost w/o shipping is $30.30.


On Fri, Jul 2, 2010 at 1:23 PM, Peter Vince <pvi...@theiet.org> wrote:
> Apologies for the previous incomplete message - somehow my laptop
> trackpad jumped the cursor over the send button :-(
>
>> Better ?
>> How many16f688s are we talking here?
>>
>> My thinking is less than 10 as only two people have asked.
>> Don't know how many have not asked.
>
> I would also like a pre-programmed PIC please, if someone can arrange
> that.  Or ideally, a complete kit of parts, but as the previous
> correspondent has written, I appreciate that is a lot of work.
>
> Thanks,
>
>     Peter Vince  (London, England)
>
> _______________________________________________
> time-nuts mailing list -- time-nuts@febo.com
> To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
> and follow the instructions there.
>

_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.




_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.

Reply via email to