Hi, I am using a module from a rubidium standard to do some experiments.
I am using a much lower clock rate into the module which has RS232 comm. At the lower clock rate I can't communicate as the corrected baud rate comes out to 955 baud. I can communicate if I keep the clock rate a binary ratio to the original clock rate albeit at a submultiple of the original 9600 baud. For instance at a clock rate of 6.28Mhz I can talk at 1200 baud, but I want to use 5Mhz as the clock rate. Are there any terminal programs out there that allow you to select rates other than the standard values? I'd like to avoid any hardware kludges and hopefully make the fix in the terminal software. Thanks, Corby Dawson ____________________________________________________________ Mortgage Rates Hit 2.67%! If you owe under $729k you probably qualify for Gov't Refi Programs http://thirdpartyoffers.juno.com/TGL3141/4ce55abf5c4b640e9cm04duc _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.