Corby, once you have tried this:
http://www.docklight.de/index.htm you don't want to use anything else. That comes from the fact that it is not exactly a terminal program instead it is a diagnostic program for problems with serial ports. The free evaluation version lets you do anything with the exception to save some settings. The scroll box for the baud rate lets you edit any baud rate and with non-standard baud rates you get a message about possible errors. Note that the keyboard is not enabled at program start. You have have to klick on the small keyboard icon to enable it. regards Ulrich Bangert > -----Ursprungliche Nachricht----- > Von: time-nuts-boun...@febo.com > [mailto:time-nuts-boun...@febo.com] Im Auftrag von Corby Dawson > Gesendet: Donnerstag, 18. November 2010 17:55 > An: time-nuts@febo.com > Betreff: [time-nuts] Hyperterminal with variable baud rate > > > Hi, > > I am using a module from a rubidium standard to do some experiments. > > I am using a much lower clock rate into the module which has > RS232 comm. > > At the lower clock rate I can't communicate as the corrected > baud rate comes out to 955 baud. > > I can communicate if I keep the clock rate a binary ratio to > the original clock rate albeit at a submultiple of the > original 9600 baud. > > For instance at a clock rate of 6.28Mhz I can talk at 1200 > baud, but I want to use 5Mhz as the clock rate. > > Are there any terminal programs out there that allow you to > select rates other than the standard values? > > I'd like to avoid any hardware kludges and hopefully make the > fix in the terminal software. > > Thanks, > > Corby Dawson > ____________________________________________________________ > Mortgage Rates Hit 2.67%! > If you owe under $729k you probably qualify for Gov't Refi > Programs > http://thirdpartyoffers.juno.com/TGL3141/4ce55abf5c4b640e9cm04duc > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.