Hi Peter-
I just bought 3 of them for 222MHz ham transverter use like Joe has
done.
Can't wait to get them. Thanks for listing them!
-Brian, WA1ZMS
On Apr 6, 2011, at 5:56 PM, Peter Loron <[email protected]> wrote:
Hello, folks. I'm the seller of the 26MHz OCXOs. Please reply off
list if you are interested in some. Thanks.
-Pete
On 04/06/2011 08:58 AM, Oz-in-DFW wrote:
Who is the seller?
On 3/28/2011 1:40 PM, beale wrote:
Just FYI, I'm not sure how this compares to other similar parts,
but I'm seeing about +/- 1 ppb (1E-9) frequency drift per 24 hour
period from one sample of the Pletronics OHM40480526, which I've
had running for about 10 days now. It runs on +5V and after a
warmup current of 250 mA for a few seconds, it draws about 60 mA
steady state at room temperature. I'm driving the tuning voltage
on pin 1 from a separate +5V reference to avoid variations due to
heater current shifts. I use a simple resistive trimpot divider
to set the voltage, this is not a GPSDO (yet :-).
I'm sure most on this list have more refined tastes in oscillators
than this one (and probably want 10 MHz instead of 26 MHz), but I
thought it noteworthy because it is so cheap. These parts are
currently available online for $2 each. I'm not affiliated with
the seller.
a few more details:
http://www.bealecorner.org/best/measure/time/Pletronics-26MHz-OCXO-tuning.pdf
http://www.bealecorner.org/best/measure/time/26MHz-osc-notes.txt
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- [email protected]
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
