The spikes are due to an artifact in the way the Tbolt firmware reads the temperature sensor chip. It reads two registers and combine the values to get a high-res temp reading. But if the firmware accesses the registers in-between the time that the temp sensor chip updates them it can produce a bogus value. Typically this seems to happen on average of once every couple of hours.
Lady Heather flags each spike with a red line at the top of the plot window. Other error events such as holdovers, bad serial data, etc are flagged in the same way... _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.