Hello In my case I think it's not a rf problem. I am far away from rf or cell phone stations and the shack is well protected against rf from outside and no cell phone nor other transmitters were used in this room at this time. If it would be an emc problem - why is only the temperature output affected? I rather believe it is an internal digitizing problem, this chip is specified to work with 0.5 deg. C steps, if I am not wrong, and the higher resolution is achieved by a programming trick.
Arnold Am 28.05.2011 03:59, schrieb Bob Camp: > Hi > > Could easily be. The spikes seem to be random and that would be a source of > random RF. > > Bob > > > On May 27, 2011, at 7:41 PM, Chuck Harris wrote: > >> Maybe a nearby cell phone calling home? >> >> Bob Camp wrote: >>> Hi >>> >>> If you watch the thermometer on the TBolt for long enough, you will indeed >>> see >>> narrow temperature spikes. The gif you posted is a very typical spike. They >>> are >>> fairly rare and they don't repeat. I believe LH averages the readings it >>> gets, so >>> they may simply be a noise burst. The initial jump is the noise pop, and >>> the decay >>> is the averaging taking it out. >>> >>> Bob _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.