> Yes, that in consistent with what I'm seeing, Pete, thanks. I am told that > the actual receiver is a Trimble SVeeSix, so why I occasionally see eight > reports from the Rapco firmware I don't understand.
Ah, I didn't realize this was based on the Trimble board - I was having a mental seizure and thinking it was using a Motorola OnCore, as so many of the others did. Are you really sure it is an SV6? Trimble also made an SV8 timing that was in the same form factor and if it was using that it would certainly explain why you sometimes see more than 6 satellites - although I have a vague memory that if you talk to it as if it was a 6-channel board it starts pretending to be one for reasons of backwards compatibility, so even if you do have the SV8 in there it likely won't do you much good. > As the unit is only required for frequency, I am not intending to modify it. > It has OCXO with quite good specifications, so it will more than meet my > needs. It would likely meet my needs five minutes after being switched on! True, but this is time-nuts. The pursuit of more accuracy than you need is the whole purpose of the list :) Regards, Pete _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
