The Tbolt does not have any sawtooth error or corrections. Its' GPS receiver LO is generated from the 10 MHz oscillator. That's what makes it the best GPSDO out there. ---------------------- I'm also thinking of porting over much of the Lady Heather t-bolt monitoring stuff to the Arduino. One thing you can do with a uP based controller is look at the t-bolt's saw tooth error correction and remove a few nS of error. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
- Re: [time-nuts] FE-.5680A trimming resolution Javier Herrero
- Re: [time-nuts] FE-.5680A trimming resolution Bob Camp
- Re: [time-nuts] FE-.5680A trimming resolution Chris Albertson
- Re: [time-nuts] FE-.5680A trimming resolution Javier Herrero
- Re: [time-nuts] FE-.5680A trimming resolution Scott Newell
- Re: [time-nuts] FE-.5680A trimming resolution Javier Herrero
- Re: [time-nuts] FE-.5680A trimming resolution Bob Camp
- Re: [time-nuts] FE-.5680A trimming resolution Javier Herrero
- [time-nuts] FE-.5680A trimming resolution Mark Sims
- Re: [time-nuts] FE-.5680A trimming resolution Chris Albertson
- Re: [time-nuts] FE-.5680A trimming resolution Didier Juges
- Re: [time-nuts] FE-.5680A trimming resolution Attila Kinali
- Re: [time-nuts] FE-.5680A trimming resolution Chris Albertson
- Re: [time-nuts] FE-.5680A trimming resolution Attila Kinali
- Re: [time-nuts] FE-.5680A trimming resolu... bg
- Re: [time-nuts] FE-.5680A trimming r... Attila Kinali
- Re: [time-nuts] FE-.5680A trimmi... Javier Herrero
- Re: [time-nuts] FE-.5680A trimmi... Attila Kinali
- Re: [time-nuts] FE-.5680A trimmi... Don Latham