I don't mind sending something like $5 to a "buy group" and we'll have
enough with a few of us. But if I were Elio I'll not feel very happy
using a working unit for this kind of use, I would try to not break
anything and he is even talking of removing the programmable chips to
read them in a programmer!. Anyway I'm recognize that a working unit
could be advantageous for some tests.
So if anybody wants to collect the money, let me know.
Regards,
Ignacio, EB4APL
On 13/02/2012 4:22, Peter Gottlieb wrote:
Better idea. Let's all donate a few bucks each and buy Elio an intact
one.
Peter
On 2/12/2012 8:08 PM, EB4APL wrote:
Hi,
Has anybody tried to ask the guy who made the forensics in Youtube if
he could send the remnants to Elio? He could make a very good use of
them.
Regards,
Ignacio, EB4APL
El 07/02/2012 0:30, Elio Corbolante wrote:
From: "Steve ."<iteratio...@gmail.com>
I've been considering ripping the firmware from the mcu as well.
I've not
got beyond the consideration stages, but i have all the equipment
here at
work. When you say that the read option is not available. is this
because
the chip has protection fuses enabled?
Also, what programmer do you have, Here at work I have a galep-5 which
AFAIK can read both the mcu and cpld/fgpa/pga, whatever it is
(provided
they are not locked, or the state machine encrypted)
My programmer is a MQP Pin-Master 48<http://www.mqp.com/pm48.htm>
which
directly support the PSD chip via JTAG (JAM STAPL files).
According to this
document:<http://www.mqp.com/pdf/apnotes/30201.pdf> the
programmer does not support "auxiliary" functions like "reading" the
device, but only erase/program/verify.
The official programmer/software (FlashLINK/PSDsoft Express)<
http://www.st.com/internet/com/SOFTWARE_RESOURCES/TOOL/CONFIGURATION_UTILITY/um0050.zip>
permits to "dump" the content of the PSD in an .obj file, but at
this date
I have not this programmer and I have to build it<
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/USER_MANUAL/CD00004566.pdf>
:-(
If you are able to dump the software using your Galep 5, you are
welcome!!!
:-)
Otherwise my two options will be:
1) to build a FlashLINK clone, hoping the PSD contents are not
protected:
according to this document<
http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/USER_MANUAL/CD00004566.pdf>
(Pag. 17) the protection flag can't be enabled using the JTAG
interface...
2) to remove the PSD chip and read its contents using a different
microprocessor (this will work for certain)
_ Elio.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1424 / Virus Database: 2112/4806 - Release Date: 02/12/12
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.