No you can't load the 10MHz (or the PPS) with five instruments in parallel. You need a distribution amplifier.
Dave -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Chris Wilson Sent: 13 June 2012 22:33 To: Discussion of precise time and frequency measurement Subject: [time-nuts] Another ThunderBolt cabling question 13/06/2012 22:27 About to do the permanent installation, if I bring two leads from the 10 MHz and 1 PPS BNC sockets on the TB to a panel in my shck can i have say 5 BNC sockets on the panel wired in parallel, with the lead from the 10 MHz socket on the TB feeding them all? And a single socket for the 1 PPS? Any need to screen the back of the socket panel, or enclose it in a metal box? Cheers. Oh, I have been running lady Heather for a while tonight, here's a screen capture, does it look OK, ther's suddenly just two traces appeared? Thanks. http://www.chriswilson.tv/heather.png -- Best Regards, Chris Wilson. mailto: ch...@chriswilson.tv _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
