> I was recently reading the manual for the TimePod. It looks quite > nice. I'm curious as to the price.
I haven't really done a formal "product announcement" on the list or anywhere else beyond the PTTI show last November, for two reasons. One is that the PTTI introduction led to a larger-than-expected amount of business... and the second, related reason is that those early adopters almost unanimously asked for some additional software features that weren't on my to-do list. I wanted to support some of those requests, such as automated test scripts and pass/fail masks, before advertising to more commercial users who would likely need the same things. Some good progress has been made in that direction, so I'm planning to raise the market visibility over the next few months. So, the short answer is that yes, the TimePod 5330A is shipping, and it's available at lead times from one to six weeks, depending on quantities ordered and parts/production scheduling at this end. The current price is US $4995.00 each for 1-5 units. > Or is this a case of "if you have > to ask, you can't afford one"? > > Joe Gray > W5JG The pricing was intended to be competitive with some of the newer time-interval counters that have been introduced with significantly fewer features and less capable specs. If someone is in the market for an Agilent 53230A or similar high-performance TIC for use at 5/10 MHz (i.e., not 1 pps), they are almost certainly better off with a TimePod instead. Other users have been manufacturers who would like to use TSC 5120A-class analyzers for production testing, but who have been deterred by the cost of putting high-end lab equipment on the factory floor. Some of the newer features being added to TimeLab are the result of requests from these users, who I didn't realize were out there at first. At the same time, quite a few R&D users are having trouble keeping their older HP 3048A gear alive, and they are looking for alternative solutions that are actively supported. For reasons too long to get into here, I tend to get a lot of email asking about HP 3048A software support, and that's really what made me decide to jump into the market in the first place. The overall idea is that while the TimePod isn't what you would call "dirt cheap," it outperforms all existing instrumentation that's available at a similar price, and it can often compete with equipment that costs 5x to 20x more. Sell sheet (from PTTI): http://www.miles.io/timepod/ss_1pg.pdf Manual: http://www.miles.io/TimePod_5330A_user_manual.pdf Software: http://www.miles.io/timelab/readme.htm (which supports a lot of other time/freq hardware besides my own) Latest beta, for more adventurous users: http://www.miles.io/timelab/beta.htm Obviously, technical discussion is more than welcome on the list, but any specific sales inquiries should go to me directly, as it's not my intent to spam the list with sales/marketing stuff beyond this post. -- john, KE5FX Miles Design LLC www.miles.io _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.