Yes, and you can even try an USB to serial adapter but with the TTL output. You can try with a simple inverter (74HC04, 74HC14 but use a resistor in series between the PC output and the inverter input) as some PC accept the 0-5V levels.
On Tue, Sep 18, 2012 at 12:22 AM, Jim Lux <jim...@earthlink.net> wrote: > On 9/17/12 3:00 PM, Azelio Boriani wrote: > >> OK, you can test a VP Oncore GPS receiver alone if you have a mean to >> translate the TTL serial port to a regular RS232 for the PC. This can be >> done with a MAX232 chip (or equivalent). >> > > There are a ton of these (serial TTL ports) available inexpensively for > use with Arduinos. In the under $20 range, usually. Try Sparkfun.com for > instance.. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.