We measured the delay on a couple of the splitters. I need to dig up the results, but I think the delay is around 7ns in both the 2 and 8 port units, and is pretty consistent port-to-port. I'll find the data and get it on the pages at febo.com.
John On Sep 30, 2012, at 2:51 AM, Christopher Brown <cbr...@woods.net> wrote: > > Assuming it does not snow again, should finish the cabling to the new > rooftop tripod and switch to the new antenna and splitter tomorrow. > > > For the LMR400 main run and jumpers is simple enough, will just measure. > > > That leaves the antenna and splitter, both have and amp and bandpass > filter and I am assuming a combined delay that is likely greater than > the cable delay given the short runs. > > > Nothing is listed in the datasheets, but they are the semi-marketing > sheets (only a couple pages) rather than a proper datasheet. > > > Anyone know what the delay for this amp and splitter is? Or better yet > a delay v.s. temp plot? > > > Thanks > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
