I had a Motorola M12+ all hooked up with a RF pigtail and data header so I just unplugged the Motorola and plugged in the SSR-6t.
The data connector was purchased from digikey several years ago and the details have been lost in the dust. However it looks like http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=A33546-ND I'm unhappy with the one I'm using as the contacts spring pressure is weak against the connector pin -- I will have to consider looking for a more "firm" fitting data connector. The RF pigtail was also obtained years ago from data-alliance.net - their P3B adapter cable. See http://www.data-alliance.net/servlet/-strse-800/MCX-BNC-female-Adapter/Detail - Sent from my iPhone - Please Reply To David Martin drmar...@ivietechnologies.com 801-372-0978 Just curious, what connector/pigtail/adapter board did you use to access the 2x5 1.27mm pitch connector on your SSR-6T. Thanks, Dale NV8U _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.