The SSR-6t is a 3.3v device.
--------------------------------------------------
From: "paul swed" <paulsw...@gmail.com>
Sent: Thursday, December 20, 2012 9:41 AM
To: "Discussion of precise time and frequency measurement"
<time-nuts@febo.com>
Subject: Re: [time-nuts] SSR-6t Connector
Not to hijack the thread. I purchased a ssr and have not rcvd it yet. But
my simple interest is to if needed replace the rcvr in my z3801. There
have
been threads on time-nuts that these rcvrs do fail with age.
My belief is that though the connector on the 3801 may be different and it
is 5V, essentially connecting the 1 pps TX RX data and power should allow
this to replace the older rcvr.
Am I on the right track?
As a longer term goal and question does this new rcvr actually improve a
3801s stability?
Thanks
Paul
WB8TSL
On Thu, Dec 20, 2012 at 10:16 AM, David Martin <
drmar...@ivietechnologies.com> wrote:
I had a Motorola M12+ all hooked up with a RF pigtail and data header so
I
just unplugged the Motorola and plugged in the SSR-6t.
The data connector was purchased from digikey several years ago and the
details have been lost in the dust.
However it looks like
http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=A33546-ND
I'm unhappy with the one I'm using as the contacts spring pressure is
weak
against the connector pin -- I will have to consider looking for a more
"firm" fitting data connector.
The RF pigtail was also obtained years ago from data-alliance.net - their
P3B adapter cable.
See
http://www.data-alliance.net/servlet/-strse-800/MCX-BNC-female-Adapter/Detail
- Sent from my iPhone -
Please Reply To
David Martin
drmar...@ivietechnologies.com
801-372-0978
Just curious,
what connector/pigtail/adapter board did you use to access the 2x5 1.27mm
pitch connector on your SSR-6T.
Thanks,
Dale NV8U
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
