I'm sure some of you noticed the flood of Tymserve 2100's on eBay lately, they were selling in lots of 3-4 (or more)! I managed to pick up a few (like I really needed them) and proceeded to add in the GPS module to make them a little more useful.
I haven't seen any Trimble ACE receivers on eBay in a while. I was doing a little research and while the SveeSix seems the same physical size and pinout, its COM settings do not appear to be adjustable (I could be wrong), but even the simple act of switching between like TSIP & NMEA requires re-flashing the receiver, there was no mention of changing the comport settings in the documentation. So I started looking at the Lassen modules since that came after the ACE line. They too appear to be the same pinout, however their physical size is different. They come in both 5v & 3.3v flavors, and I managed to find someone on eBay selling a 5v one. My question is, has anyone tried to get a TS2100 to communicate with a different receiver than the ACE line? Kind of curious what works and what doesn't. I did manage to get an Oncore UT+ off eBay for 1 cent (plus $8 shipping)... Can't beat that! _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
