Your screenshot is looking good, it is 30% through a 2000 sample survey. I don't know why you have a red LED. A red LED is generally hardware failure on the Trimble Nortel units AFAIK.
Hit space bar in LH to get command help. Once you are used to LH it's a very powerful tool. e then e again writes everything to nvram. There are plenty of LH experts on the list, I have only recently really started to use LH of late due to the fact I have a great stack of HP smart clocks that use SCPI type commands. I have only just recently managed to get my hands on a couple of the NTG units. If the ADEV is what I think it is saying in LH, the Nortel/Trimble NTG are above average GPSDO! --marki -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of quartz55 Sent: Sunday, 8 September 2013 8:41 AM To: Discussion of precise time and frequency measurement Subject: [time-nuts] New NTBW50AA I found the Menu "M". Now to figure out what all these things mean. Do I want to write this to the eeprom not that it's settled down? 'E' Dave N3DT _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.