Hi Ok, the yellow trace (temperature) still does not look right. Either you have a lab grade temp chamber to keep stuff in, or it's just not reporting temperature.
Units and limits and meaning change for ADEV depending on the tau. If you are looking at 1 tau (which I thought you were) then it's a much higher level of noise and much less accuracy than a tau of several thousand seconds. Bob On Sep 8, 2013, at 6:46 PM, quartz55 <quart...@hughes.net> wrote: > Here's a screen shot of when I did the &a command. It went through a bit of > glitches at the start you can see on the left of the plot and then pretty > much straightened out. Even the green line has stabalized a lot. > http://s251.photobucket.com/user/DogTi/media/time/20139-82237_zps85bd9fe7.jpg.html?sort=3&o=0 > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.