Just as a note you can reconfigure the time pulse output any of the Ublox modules (doesn't have to be the timing module) via commands to give out a pulse up to :
7 Series :0.25 Hz … 10 MHz NEO-6G/Q/M/P/V : 0.25 Hz to 1 kHz NEO-6T :0.25 Hz to 10 MHz Don't know if this helps anyone. Cheers, Anthony On Fri, Sep 20, 2013 at 3:24 AM, Bill Reed <br...@otelco.net> wrote: > Hi Merv, > > Thanks. I will try one. > > This is a great group! > > Bill > > > -----Original Message----- From: Merv Thomas > Sent: Thursday, September 19, 2013 9:01 PM > To: time-nuts@febo.com > > Subject: Re: [time-nuts] GPS with 10KHz output > > Hi Bill, > > I have a number of these modules purchased from the particular eBay source > you gave a link for. They work well but I never found a way to keep their > data output as NMEA as they seem to revert to Binary on power down. > However > if it is just the 10KHz output you want from them or their Binary data > stream they should be fine in my humble opinion. I have a small batch file > that commands them into NMEA once powered up but nothing to save this > setting. > > Merv VK6BMT > > ______________________________**_________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/** > mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. > ______________________________**_________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/** > mailman/listinfo/time-nuts<https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts> > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.