0.250 is another size UT makes. Might try ebay.
John Allen mailto:j...@pcsupportsolutions.com M: 508 361-6229 -----Original Message----- From: time-nuts-boun...@febo.com [mailto:time-nuts-boun...@febo.com] On Behalf Of Jim Lux Sent: Thursday, October 17, 2013 12:31 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Coax cable for volute antenna On 10/16/13 8:26 PM, quartz55 wrote: > I've been searching for the small copper hardline I can use for the feed on the gps volute (egg beater) antenna. Can anyone steer me where to get a foot or so of the small 50 ohm line so I can make a few antennas? I've been searching mouser to no avail. > what size (0.141, 0.085, 0.047" OD)? You probably won't find it at Mouser type places. RF Coax, Pasternak, etc. are better bets. Uniform Tubes might send you a sample. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.