I think I see the problem. I was wondering about using the 1PPS output from my Rb in a test. Cobbling all that together would be a quick bit of work for you, but I spent my life in IT. I'm good with a soldering iron, but I readily admit my shortcomings at hardware tinkering.
Bob >________________________________ > From: Bob Camp <li...@rtty.us> >To: Tom Van Baak <t...@leapsecond.com>; Discussion of precise time and >frequency measurement <time-nuts@febo.com> >Sent: Thursday, February 6, 2014 7:43 PM >Subject: Re: [time-nuts] Rb as source for ADEV? > > >Hi > >My intent was certainly not to stop anybody from doing anything with what they >have. My concern is that this is a lot of work for modest return. A simple >single mixer setup for $20 would dramatically change things…. > >$3 mini circuits double balanced mixer >$3 op amps x 2 >+/- 15 V supply you already have (hopefully). >$5 for a piece of perf board >$3 for 3 BNC connectors. >$3 left over for resistors and capacitors. ><snip> > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
