On 09/02/14 02:57, Jamieson (Jim) Rowe wrote:
Hi Magnus,
Thanks again for those further suggestions. I do have a GPSDO, and I had
been able to use it with a counter to check that the FE-5680A was
swinging either side of 10MHz. But I didn't make sure that it was
swinging evenly each side of 10MHz . According to my notes it was
swinging between 9.999770 and 10.000036MHz -- i.e., about 230Hz low and
about 36Hz high. But it was spending more of the time below 10MHz than
above -- does this suggest to you that I should tweak C217 until it
swings by about the same amount either way?
Yes, that is exactly what I would do.
Cheers,
Magnus
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
