I have an OpenHPSDR Hermes and it has no problem receiving WWVB;
however, since I live in Fort Collins - Colorado, part of the success
might just be the strong signal. I wonder if I could just stick a piece
of wire into one of the channel inputs of a 192Khz sample rate audio
interface (especially if it had a good low noise mic preamp) and decode
WWVB from baseband audio!
John
AC0ZG
On 2/20/2014 9:55 PM, wb6bnq wrote:
Hi Zim,
With but a very few exceptions most broadband Amateur radfio
trancievers do not do well below 500 KHz even though many allow for
tuning below 500 KHz.
Bill....WB6BNQ
_______________________________________________
time-nuts mailing list -- time-nuts@febo.com
To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
and follow the instructions there.
