Can you post a picture of the board Bert Miami In a message dated 9/8/2014 2:20:37 P.M. Eastern Daylight Time, adrian.valentin.constantine...@gmail.com writes:
Hello, I have a OSA-5585 cesium PRS and it is not working. On the local manager i have a cesium module alarm. I opened it and found out that the high power module that drives the cesium oven is not working because it doesn't receive the correct voltages. Instead of 10 and 24 volts it only gets 8 and 13 volts. So i pulled out the power board and found out all the capacitors were bulged. I replaced all of them with the corresponding values and now i have 0 volts on its output and some smoke coming from a diode on the board. Does anyone have some schematics for this unit, or could at least help me with the connectors on the power board? I found the output connectors that should deliver the 10 and 24 volts but i don't know what the inputs are. If i can find out what the inputs are then i could debug the board easier. Please excuse my writing, english is not my native language. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.