Hi The information came from the HP data sheet on the oscillator. They provide it to the people who manufacture the oscillators for them.
Bob On Sep 29, 2014, at 1:14 PM, Dr. David Kirkby (Kirkby Microwave Ltd) <drkir...@kirkbymicrowave.co.uk> wrote: > On 29 Sep 2014 17:58, "Bob Raker" <bob.ra...@gmail.com> wrote: >> >> It is a low end OCXO - uses AT cut crystal. 15V @ 300 mA. Warm-up time > is >> 6 minutes max for .1 ppm. Other specs as indicated in previous emails. >> >> Has NO EFC. > > Where do you get this information from? > > I think I am going to take the covers off this soon, as I am keen to get > direct access to the samplers. Unfortunately Keysight have now sold all > the cables, but do have the front panel overlay which is arguably the most > critical item. When I do, I will photograph the oscillator. > > Dave > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
