On 29 September 2014 22:45, Bob Camp <kb...@n1k.org> wrote: > Hi > > The information came from the HP data sheet on the oscillator. They provide > it to the people who manufacture the oscillators for them. > > Bob
Can you share the data sheet? Dave > On Sep 29, 2014, at 1:14 PM, Dr. David Kirkby (Kirkby Microwave Ltd) > <drkir...@kirkbymicrowave.co.uk> wrote: > >> On 29 Sep 2014 17:58, "Bob Raker" <bob.ra...@gmail.com> wrote: >>> >>> It is a low end OCXO - uses AT cut crystal. 15V @ 300 mA. Warm-up time >> is >>> 6 minutes max for .1 ppm. Other specs as indicated in previous emails. >>> >>> Has NO EFC. >> >> Where do you get this information from? >> >> I think I am going to take the covers off this soon, as I am keen to get >> direct access to the samplers. Unfortunately Keysight have now sold all >> the cables, but do have the front panel overlay which is arguably the most >> critical item. When I do, I will photograph the oscillator. >> >> Dave >> _______________________________________________ >> time-nuts mailing list -- time-nuts@febo.com >> To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts >> and follow the instructions there. > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.
