Hi Which port are you putting the commands into?
The box *may* respond to some things on the Diag port that it does not respond to on the PPS port. I have not investigated this, but it is a possibility. Bob > On Nov 26, 2014, at 12:52 PM, Mitchell Janoff <majan...@verizon.net> wrote: > > I now have my KS-24361 operating and I've successfully communicated via RS232 > (using the hack described previously) with both SatStat and GPSCon using > Win7. The time I'm getting out of the unit is the GPS time (+16 seconds). > I've tried to convert the time to UTC by first changing the mode from > continuous output to a manual time update(:PTIM:TCOD:CONT 0), and then > changing the time to UTC from GPS using the :PTIM:UTC 1 command. Neither of > these commands seem to work with this unit. > > Has anyone experienced this and did you come up with a solution? > > Thanks. > > Mitch. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.